• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

What have you done to your CUCV today/lately - Part 2

Tinstar

Super Moderator
Super Moderator
Steel Soldiers Supporter
4,254
1,687
113
Location
Edmond, Oklahoma
I cleaned up my Interior floor and treated it again with ACF50.
Had a ton of dirt that had collected in the nooks and crannies.
Now I’m good til spring at least.
 

Rutjes

Well-known member
Steel Soldiers Supporter
359
272
63
Location
Amersfoort, The Netherlands
Bought a 6.5 and 4L80E, both original '98. Putting a 4L80E in my resto-mod has been on my mind for a while and for the price I couldn't let this go. Even came with the transfer case that wasn't advertised. I know of a member here that spent double the money on just a motor (with turbo though) last week...

I'll have a spare 6.5 in case the one in the CUCV or K1500 ever blows. Will get the two 6.2 motors and two TH400s ready for sale now, get some more funds for the project.

IMG_20200923_181521.jpg

Also, looong overdue (what's new...), I continued removing rivets from the chassis. What a time consuming, ****** job, almost done though.

IMG-20200922-WA0008.jpeg

Had the injectors from the Navistar 6.5 tested, one needed a new nozzle. Waiting for some copper seals to put them into the K1500 and then I'll have those tested to go back in the Navistar. Looks like the 6.2 from the donor M1009 has short body injectors as well, so I'll get those tested to have a spare set on hand. Will probably send the ones from the new 6.5 in as well. Doesn't hurt to have (lots of) spare parts that don't take up a lot of space.
 
Last edited:

Tinstar

Super Moderator
Super Moderator
Steel Soldiers Supporter
4,254
1,687
113
Location
Edmond, Oklahoma
Installed new glow plugs and changed oil and fuel/oil filters.

Wasn’t having issues with the glow plugs at all but it’s been at least 2 years since last changed and don’t want any issues this winter.
 

Garagefull

Member
80
45
18
Location
Reno Ohio
Oil change,inj pump and filters. I always thought this engine was louder than my others. It was allowed the day we picked it up from GL. I feel bad that I did not change it sooner,The motor is so much quieter and smoother now. Injection pump was a fun job with a 6 inch lift and 37’s.
 

joshuak

Active member
747
214
43
Location
Slower shore, DE
Lol. What have you done to your cucv today? I have been using it for a mobile scaffold to give the house a wash down. I ended up using it to rip that smart meter right out of the socket when I backed into it .

But is the truck OK? That's the important part.

Good you can have a laugh about, we've all got plenty of those.
 

german m1008

Well-known member
Steel Soldiers Supporter
883
1,302
93
Location
Rhein-Main Area, Germany
......... my M1009 is not with me yet, but .......... I always say that hard-to-find spare parts for old cars are bought when you find them ........ not when you need them ( then you won't find them ).
IMG_4390.JPGIMG_4389.JPGIMG_4388.JPG


so the answer to the question what did I for my CUCV is ........ made provisions
 
Last edited:

cucvrus

Well-known member
11,263
9,552
113
Location
Jonestown Pennsylvania
Very nice piece you have there. I never had much problems with that tried and true OEM part. A few pressure switches over the past 25 years but nothing more. I am as excited as you for the M1009 to arrive.
 

kallisti5

Member
78
23
8
Location
Texas
Been a while since I posted.

* Roll on bedliner $69
* Soft top ($900 oof)
* Rear tires (dry-rotted, $300)
* Change rear diff fluid (a nice shade of black coffee)
* Driver + Passenger door cards (~$275)
* Driver + Passenger rubber seals

Longer Ago:
* Transmission fluid changed
* All important rubber lines replaced.
* Master cylinder replaced
* Brake lines bleed, cleaned, converted to DOT 3/4
* Dash pad swapped with a freebie.

Think i'm just about passed getting out of it what I put into it :)


ae95a8ab-3e72-4d48-aeb1-754f44a75423.jpg

IMG_20201006_091104.jpg


After having the hard-top listed on Craigs List for a month for "next to nothing", I finally cut it up and took it to the dump. The fiberglass needed a lot of work, and just held in the Texas heat when on the M1009.

TODO:
* At some point I want to get it a "nicer" olive paint job, but for now it's just rattle-can to keep body rust away.
* Weird... the lighting of that photo makes it look like gray + green. It's the same color in sunlight.
* Address some more of the leaks.. Damn transmission gasket is leaking slowly.
* Leaf springs are pretty rusted up, Rear is more "frowny" than "smiley" if you get my drift.
* Extend bed liner into cab area and patch some small rust holes near A pillar. This thing isn't really luxury.
 
Last edited:

Rutjes

Well-known member
Steel Soldiers Supporter
359
272
63
Location
Amersfoort, The Netherlands
A friend of mine saw an ad for a CUCV (I sneaked it into our WhatsApp group :rolleyes:) and asked me to go have a look with him. He bought it. :LOL: We went out for a bit of offroading, but unfortunatly my only drivable truck, the K1500, is over it's MOT so I had to bring my bike.

IMG-20201018-WA0023.jpeg

Previous owner installed a (GM4) turbo and body lift to clear 37" HMMWV tires. Truck is still 24V. Front and cab have been restored by previous owner, the bed still needs some rust patched up. Not a big fan of the exhaust coming up through the bed, my friend is still unsure. I offered him my K1500 exhaust as I'm waiting for a Diamond Eye to replace it.

I installed an XJ steering shaft. Definitly improved steering. Next up are some extra gauges; coolant temp, transmission temp and EGT. Boost is already there. Talking about boost, the waste gate actuator is getting vacuum from the pump on the rear of the block. I suggested getting a mechanical waste gate actuator as it's getting close to 15 PSI of boost now, way too high IMO without new head gaskets and ARP studs. Motor mounts looked a bit saggy so we will be ordering Energy Suspension motor and transmission mounts.
 
Last edited:

Mainsail

Well-known member
Steel Soldiers Supporter
1,420
1,420
113
Location
Puget Sound, WA
I opened the inside door of the garage last night to make sure both overheads were closed before going to bed.

I heard a strange rhythmic knocking, or popping sound coming from the driveway. :unsure: Put some shoes on and went outside the see what it was.

Turns out I left the Whelen siren/pa controller turned on in the 1009 and it had depleted battery 1 enough that its internal relay was disengaging and reengaging, causing the speakers to pop. 😒

It's been parked since the Gen 1 light issue. The new alternator should be on the truck for delivery today, so hopefully back on the road by the weekend (if stuff would stop getting in the way!)
 

TechnoWeenie

Well-known member
Steel Soldiers Supporter
1,639
1,647
113
Location
Nova Laboratories, WA
I opened the inside door of the garage last night to make sure both overheads were closed before going to bed.

I heard a strange rhythmic knocking, or popping sound coming from the driveway. :unsure: Put some shoes on and went outside the see what it was.

Turns out I left the Whelen siren/pa controller turned on in the 1009 and it had depleted battery 1 enough that its internal relay was disengaging and reengaging, causing the speakers to pop. 😒

It's been parked since the Gen 1 light issue. The new alternator should be on the truck for delivery today, so hopefully back on the road by the weekend (if stuff would stop getting in the way!)
Charge the battery asap. A discharged battery left discharged will be permanently damaged in short order.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks