• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Need transfer case help

DMF

New member
5
1
1
Location
Warren, MA
I have a transfer case from a 6x6 with split axles in my home-made skidder. The output shaft to the front axle is leaking. I removed the driveshaft and I need to buy a 1-1/2" socket to get the yoke off. Is that all I need to remove to get the seal out? There is a cover surrounding the seal with 4 bolts; does this need to be removed as well? Is there an exploded view/parts list available for this T-case? I looked in the TM forums but could not find any. Thanks in advance for your help!
 

Attachments

NDT

Well-known member
Steel Soldiers Supporter
10,107
5,714
113
Location
Camp Wood/LC, TX
Yup remove the yoke and the retainer, replace seal with modern seal (take yoke and retainer to bearing supplier for measurements). Remove shims if there is shaft play. Put a speedysleeve on the yoke if it’s grooved.
 
  • Like
Reactions: DMF

DMF

New member
5
1
1
Location
Warren, MA
Yup remove the yoke and the retainer, replace seal with modern seal (take yoke and retainer to bearing supplier for measurements). Remove shims if there is shaft play. Put a speedysleeve on the yoke if it’s grooved.
So the part with the 4 bolts needs to be removed as well then? Just trying to be clear. Thanks!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks