• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Mep803A Auxiliary fuel tank

Denvercaitland

Active member
Steel Soldiers Supporter
Found a 73 us gallons reefer tank. Built a stand so I could load on a trailer with the skidsteer when needing refills. Quick disconnect before the pump for the 803 and quick disconnect after the pump for fuel nozzle. Put about 60hrs on the set so far. Aux pump kick in at 1/4 tanks and shuts off at 3/4 as it should. Fun fabrication project. :)
 

Attachments

Denvercaitland

Active member
Steel Soldiers Supporter
A few additional details in case it's of help/interest.

The 803 batteries are set up inside the shop, so to power the aux tank fuel pump I wired an external plug ( to one battery for 12v), using an extension I can connect to the outlet on the pump box. ( common plug , so extension can easily be adapted to be fed by car/equipment battery)

On the output side of the pump I put a quick disconnect for the fuel nozzle ( basic gear pump 3.7 gpm, but sufficient for refueling the skidsteer).

More complicated than it needs to be, but suits my needs and was a fun project:)
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks