• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

MSD-ICE Kit Diagnostics

GreaseMonkee63b

New member
14
12
3
Location
Fresno, CA
Folks, GreaseMonkey63b is asking about the internals of the ICE diagnostics adapter box, not the HMMWV PCB.

I can't for the life of me remember if I have the black or the green adapter box. After Christmas, I may be able to find some time to take a look and see if I can easily disassemble my unit for some pictures.
Yes, correct I am referring to the ICE diagnostic box. I was messing with it for the first time, I powered it up with the NATO cable option and it did no like it. I had a second one to use and that time with the 120v adapter. I learned my lesson
 

Wire Fox

Well-known member
1,254
158
63
Location
Indianapolis, Indiana
Just responded to some PMs that have been left for me on this subject over the past couple of months. Nice knowing there's still an interest in these! I'm guessing another batch of these trickled out a couple months ago and people are just figuring out that the software is a bit of a treat to find and setup...
 

M1165A1

Well-known member
369
752
93
Location
The High Country, CO
They have been all over govplanet.com, some in the most recent auction went for $200'ish numbers.

If anyone has the TM for the MSD-ICE, I would greatly appreciate a copy -- I have the drivers.
 

Wire Fox

Well-known member
1,254
158
63
Location
Indianapolis, Indiana
They have been all over govplanet.com, some in the most recent auction went for $200'ish numbers.

If anyone has the TM for the MSD-ICE, I would greatly appreciate a copy -- I have the drivers.
The TM is actually buried there with the drivers, too. I got my copy of the TM that way. If you still need it/can't find it, I can see about sharing it from my computer some time today.
 

KN6KXR

Well-known member
209
529
93
Location
Felton, CA
Bumping an old thread.....

So I picked up one of these kits. Not so much for the connectors and cables but because it appears the be the least expensive way to get a Dearborn adapter. What do I want to do with it? Talk to and reprogram my CTIS on my M936A2. I'll have to make an adapter cable as they were never wired in like later trucks but the protocols are there on later CTIS ECU's. Also I think the latest software is available from DANA.....

At any rate I just got the kit with no software or documentation. All the parts are there. Sure would be nifty to be able to talk to what I can on the truck. I have a Panasonic Toughbook CF-30 and can do a separate boot partition if needed. Anybody have the software or documentation? Drivers for the Dearborn 3+ adapter? Any help appreciated!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks