• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

CUCV Integrated winch mount.

Would you be interested in purchasing?

  • Winch mount weld together kit

    Votes: 2 16.7%
  • Reproduction Brush Guard

    Votes: 2 16.7%
  • Reproduction Brush Guard w/ integrated mount

    Votes: 1 8.3%
  • Not interested

    Votes: 7 58.3%

  • Total voters
    12
  • Poll closed .
61
-28
16
Location
Liberty Hill, TX
My apologies !!
I had posted this in the vendors forum, then realized only vendors could vote in the poll. :sad:

A customer had seen a brush guard winch mount on a CUCV featured during a YouTube show "Dirt Every Day". He asked if I could make a mount like he had see on the show. I was able to reproduce the mount to the best of my abilities. This is what I was able to build for him.



I am testing the waters here to see if there would be any interest in a weld together kit, that you would install at home to your existing CUCV brush guard.
At this time estimated sale price of the kit w/ shipping to the lower 48 states will be $400.00

The kit will include;
a universal winch plate precut to fit the CUCV factory brush guard,
vertical trusses,
horizontal trusses,
flat strap precut to length
Assembly Illustrations.

I am also contemplating building brand new reproductions of the Factory CUCV Brush Guards.
with or without the winch mounts integrated into them. I have not calculated exact cost at this time for the reproduction brush guards.

What I need from you forum members is a show of interest. Please vote in the above poll. You can select more than one choice.
 
Last edited:

Chaski

Active member
684
55
28
Location
Burney/CA
I like it.... But not the price.

For a $40-60 universal winch plate, some pieces of flat strap and 4 triangles and a few other bits that look to be 3/16" cut out on a CNC plasma the price point at $400 is high for me.

JMHO
Pete
 

m38inmaine

Well-known member
2,090
44
48
Location
Maine USA
A lot of people won't have the equipment to weld this which will increase the cost. I would engineer a mount that would replace the front shackle mounts, plug and play will get a lot more customers I believe.
 

richingalveston

Well-known member
1,715
120
63
Location
galveston/Texas
20161205_213650 (1).jpg
I don't like using the brushgaurd for that much pulling. I think it is a week point I also think it messes up a good brush guard.
I know there are kits like what I built but nothing as over built as mine but I think heavy duty kits like my receiver mount and winch mount would be a better kit to sell. It bolts to the frame, you can remove the winch and store it so it does not get stolen. I plan to weld the bolts holding the winch to the plate, I just put the winch on there and have not done that yet. and also add a locking pin along with a chain or cable lock to the winch and frame.
the plate for the winch and receiver is 3/8 inch thick. the only part purchased was the 2 inch receiver from tractor supply I believe it was around $20. It is heavy and handles will be added to mine.
I think price wise the receiver mount is a better deal, I can also put a bike rack up there or my receiver basket or even a receiver to hold the cooler or spare tire. It has many options.
I do believe there is a market for reproduction brush gaurds. They are getting hard to come by. And it think there is a market for a heavy duty receiver mounts. most sold are not real strong and these receiver mounts are not just a cucv item

Rich
 

Cantos

New member
75
2
0
Location
Germany
I think it looks cool, but too expensive.
I tought about the same kit and the lasercutted parts cost a quater of your price.
 

muddobber40

New member
116
4
0
Location
la cygne, ks
The winch mount integrated into the grille guard is plenty strong if done right. No need for all the excess and unsightly(IMO) strapping. There are ways to reinforce the grille guard and frame mounting brackets that provide more than adequate strength for the winch. Been building them similar for years with plenty of customer feedback. With exception of the truck with all the LED lights, all the winches are 9500 pounds. The other is a 10K


The cost is a bit excessive too. Again, just my opinion
 

Attachments

LastFbody

Member
126
10
18
Location
Milwaukee WI
What kind of enhancements did you have to make to the front end to have enough strength Muddobber? The look is pretty awesome, even better if it's functional.
 
61
-28
16
Location
Liberty Hill, TX
I like it.... But not the price.

For a $40-60 universal winch plate, some pieces of flat strap and 4 triangles and a few other bits that look to be 3/16" cut out on a CNC plasma the price point at $400 is high for me.

JMHO
Pete
I have not priced CNC plasma cutting, or water jetting in my area at this time that is why I stated this above.
"At this time estimated sale price of the kit w/ shipping to the lower 48 states will be $400.00"

I am conducting the poll to see how much interest there is in a kit, and if it is worth investing any more of my time and money into researching the cost of water jetting, or CNC plasma Cutting the parts. I have hopes that I can have the parts mass produced for a fraction of what it costs to do it by hand. Thus keeping the cost of the parts down.
 

blueblaze

Member
94
7
8
Location
Chapleau, Ontario
I believe the winch mount integrated with the brush guard is probably a bad idea. My experience with winches mounted above frame rail height is that they tend to pull the truck down while winching which loads up the front suspension just making it harder on the truck and acting as lever in a sense. Where as the 50 dollar universal winch plate and 2 pieces of receiver stock bolted to it using the front shackle mounts seems to be perfect in my experience. That and if you measure it right it can go from the front to the rear shackle mounts essentially giving you a choice of either direction aslong as you have battery cable run to the rear of your rig. Lastly, its removable when you don't want it there. On the other side, I could see people buying the integrated mount just because its a cleaner look and because of the media representation surrounding it.
 

The FLU farm

Well-known member
Steel Soldiers Supporter
3,277
1,188
113
Location
The actual midwest, NM.
That winch mount on Dirt Every Day was likely the one Fred Williams built for his M1008. Chances are that he also wrote about it in 4-Wheel & Off Road.
I'm way too far behind on magazine reading to know, but he sent me photos of the winch mount when he built it and it looked very nice. Knowing Fred, it's also plenty strong.
 

Ilikemtb999

Active member
691
42
28
Location
Denver, CO
That winch mount on Dirt Every Day was likely the one Fred Williams built for his M1008. Chances are that he also wrote about it in 4-Wheel & Off Road.
I'm way too far behind on magazine reading to know, but he sent me photos of the winch mount when he built it and it looked very nice. Knowing Fred, it's also plenty strong.
Dirt every day is hosted by Fred Williams (sounds like maybe you haven't seen the show) so yes it's one in the same. You should take a look if you haven't seen it. :grd:
 

The FLU farm

Well-known member
Steel Soldiers Supporter
3,277
1,188
113
Location
The actual midwest, NM.
Yeah, the episode with my Jeep is the only one I've seen. I need 48 hour days, or fewer hobbies, or maybe break a leg, so I get a chance to watch the other episodes.
Would also like to see more of the Road Kill videos, and...
 

Skinny

Well-known member
2,130
486
83
Location
Portsmouth, NH
I like the reproduction brush guards. Everyone online wants $250+ for them without a bumper which to me is stupid money for something I still have to refinish or bend it straight again. I'd rather pay money for something new ready to paint and install.

I don't like the idea of the winch being up that high and far away from the frame. The leverage is high, it is smack in front of the grille blocking airflow, and I don't think the mounting is up to the task of winching. Seems like the factory guards have a hard enough time doing just the guarding of brush. I prefer to keep my winches tight in the frame rails.

14656382_667709233406427_1305561960419342161_n.jpg14705647_667709076739776_5490771170817058802_n.jpg15337469_695526413958042_1422178124773210813_n.jpg
 

stevemcgee99

New member
22
8
3
Location
Seattle
I like the reproduction brush guards. Everyone online wants $250+ for them without a bumper which to me is stupid money for something I still have to refinish or bend it straight again. I'd rather pay money for something new ready to paint and install.

I don't like the idea of the winch being up that high and far away from the frame. The leverage is high, it is smack in front of the grille blocking airflow, and I don't think the mounting is up to the task of winching. Seems like the factory guards have a hard enough time doing just the guarding of brush. I prefer to keep my winches tight in the frame rails.

View attachment 660312View attachment 660313View attachment 660314
That's how I want to mount a winch.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks