• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Squibbly's M1009 and other Questionable Projects

ezgn

Well-known member
Steel Soldiers Supporter
650
1,039
93
Location
Lake Elsinore Ca.
New Flex plate has arrived from Summit. I'm wondering if I need to hit this with some POR15 or something. Seems like it'll rust pretty quick.View attachment 851046
View attachment 851044View attachment 851045
Give it a shot and paint it up. Hope it helps. If it was mine it would be one and done, no paint. I don't think the originals had paint. I'm sure it would out last me without paint. Your project is coming along good, keep it up, looking forward to your progress.
 

WWRD99

Well-known member
Steel Soldiers Supporter
880
1,339
93
Location
York Pa
New Flex plate has arrived from Summit. I'm wondering if I need to hit this with some POR15 or something. Seems like it'll rust pretty quick.View attachment 851046
View attachment 851044View attachment 851045
I use por15 on all my bodywork I'm doing...the flywheel isn't really out in the elements to much though but it doesn't hurt to use it...it is a pretty big prep job but does work very well when done right...really if you have time to paint it why not.

Sent from my SM-G955U using Tapatalk
 

Squibbly

Well-known member
406
1,030
93
Location
South Carolina
Well, based on the feedback of "f*ck it" and "paint it..why not" (my translation of events), I suppose I won't waste the expensive POR15, and can give it the rattle can job, the ultimate happy medium.

Snap17.png

Quick, easy, cheap, dries to a nice flat black (not that I'm ever really going to see it).

Snap19.png
 
Last edited:

Squibbly

Well-known member
406
1,030
93
Location
South Carolina
So...according to the manual I need 6 *new* flex plate bolts part number 3727207. Apparently these stretch like head bolts.
All the local stores only sell flywheel bolts which are too long.
Those won't arrive till Tuesday, so it appears I can take my time looking over the transmission issues, moving the tranny back 4 inches, and making everything nice and tidy for a quick Tuesday install.

A failure to plan is a plan to fail as they use to say in the military. 🤦‍♂️

Seems like this handy dandy flywheel grabber will be useful for torquing those bolts to spec. I’m sure other people who don’t use this tool have a simple solution.

 
Last edited:

WWRD99

Well-known member
Steel Soldiers Supporter
880
1,339
93
Location
York Pa
So...according to the manual I need 6 *new* flex plate bolts part number 3727207. Apparently these stretch like head bolts.
All the local stores only sell flywheel bolts which are too long.
Those won't arrive till Tuesday, so it appears I can take my time looking over the transmission issues, moving the tranny back 4 inches, and making everything nice and tidy for a quick Tuesday install.

A failure to plan is a plan to fail as they use to say in the military. 🤦‍♂️

Seems like this handy dandy flywheel grabber will be useful for torquing those bolts to spec. I’m sure other people who don’t use this tool have a simple solution.

That tool can be great to hold the flywheel for sure....if you haven't used one then here's a tip...get someone to hold it while you torque the bolts...doing both is interesting at best with a fair warning that if the tool slips it turns that new sharp tooth flywheel into a knuckle removing saw blade...welding gloves help!
 

Squibbly

Well-known member
406
1,030
93
Location
South Carolina
heh, on my 1008 i first checked this on glove box. Just after week or two realised that army replaced for some reason glove box door. Real VIN was different, probably options (hehe, options) too...
I've got the VIN in 4 places (that I know of) on this. Drivers Door on the cab. Drivers Door on the door itself, and the actual VIN tag on the dash that you can see looking in the windshield on the drivers side, and the order tag in the engine compartment.

I know everyone like a good VIN number when times are tough, but they may have overdone it here.
I actually want to get a cover for the one on the dash. I saw something recently where car thieves were pulling VINs off peoples cars, forging VIN plates and sticking them on similar stolen cars. I don't want a swat team outside my house, when someone hits a bank in a car with my VIN. 💀
 

WWRD99

Well-known member
Steel Soldiers Supporter
880
1,339
93
Location
York Pa
I've got the VIN in 4 places (that I know of) on this. Drivers Door on the cab. Drivers Door on the door itself, and the actual VIN tag on the dash that you can see looking in the windshield on the drivers side, and the order tag in the engine compartment.

I know everyone like a good VIN number when times are tough, but they may have overdone it here.
I actually want to get a cover for the one on the dash. I saw something recently where car thieves were pulling VINs off peoples cars, forging VIN plates and sticking them on similar stolen cars. I don't want a swat team outside my house, when someone hits a bank in a car with my VIN. 💀
I put a piece of paper over mine on all my cars...no reason anyone needs to see it!!
 

Squibbly

Well-known member
406
1,030
93
Location
South Carolina
OK. I opted for the 'Gut Swap' from the new $30.00 voltmeter to the old casing and plate.

It doesn't appear that the "wings" on the old meter made any difference in fitment.

Once I get the batteries reconnected I can make sure it reads right with the old plate. If not, I'll have to live with the new display plate, but I'm going to keep the rest of the old casing.

The new ones that cost 90 bucks gave me 'anal glaucoma' because I couldn't see my ass paying that amount. 😂

Snap26.pngpic2.jpg
 
Last edited:

cucvrus

Well-known member
11,263
9,552
113
Location
Jonestown Pennsylvania
You guys must live in the ghetto. And intentional concealing a VIN is a crimes code in most states. No one would go thru the trouble to try and steal your VIN number. The state and title are issued in your name legally. Happy Thanksgiving to all you Secret Agent men.
Or Maybe
Enjoy the Day. Laugh, Live, and Love. Or
 

dougco1

Well-known member
817
544
93
Location
Cooperstown NY
You guys must live in the ghetto. And intentional concealing a VIN is a crimes code in most states. No one would go thru the trouble to try and steal your VIN number. The state and title are issued in your name legally. Happy Thanksgiving to all you Secret Agent men.
Or Maybe
Enjoy the Day. Laugh, Live, and Love. Or
There you go with the Grinch again Rick. You know I was traumatized by him when I was a child
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks