• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

mep 803a power at lugs one time

kloppk

Well-known member
Steel Soldiers Supporter
1,934
2,988
113
Location
Pepperell, Massachusetts
When running with S5 in the center position S5-5sshould have 24 volts on it. When you lift S5 S5-5 should go to 0 volts.
Seems that's what you have working now.

With the set running and you lift and HOLD S5 UP does the Contactor lamp illuminate?
Does it stay illuminated when you release it?
 

Walter J Riedel

New member
20
4
3
Location
Harlingen, Texas
When running with S5 in the center position S5-5sshould have 24 volts on it. When you lift S5 S5-5 should go to 0 volts.
Seems that's what you have working now.

With the set running and you lift and HOLD S5 UP does the Contactor lamp illuminate?
Does it stay illuminated when you release it?
it does not light up. Contactor does not illuminate. it does on push to test. Just tested S5 per TM and it is good.
 

Walter J Riedel

New member
20
4
3
Location
Harlingen, Texas
It's working. Probably J6 connectivity issue. One other issue. Amp meter shows discharge instead of charge. Alternator checks good. 28 volts. Battery's are charging at 14 volts. Thoughts?

Sent from my BE2028 using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks