• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

AMMPS MEP-1040 10KW Generator List of Part Numbers

Daybreak

2 Star Admiral
Steel Soldiers Supporter
1,521
740
113
Location
Va
AMMPS MEP-1040 10KW Generator Parts

MEP-1040 10kw AMMPS Generator 6115-01-561-7455
YANMAR 3TNV84T-BMCU engine (3 cylinder turbo, 1.5L)

Air filter
Fleetguard AF26168, Napa 9168, Wix 49168, Baldwin RS5325, Donaldson P616641

Fuel/Water Separator
Racor R15S, Napa 3433, Baldwin BF46019-O

Oil Filter
Yanmar 119005-35100, Napa 1344, Baldwin B161-S, Fleetguard LF16157

Oil
Good 15w-40 heavy duty diesel oil

Coolant
Good heavy duty coolant

Belt
Gates ax38 9012-2038 BELT, v drive 1/2 inch x 39.3in alternator

Fuel pump
Airtex E11025

Fuel Level Switch
FSCMN-01 fuel level

coolant 6.2 qt (radiator and overflow 4 qts, block 2.2 qts)
oil 15w-40 diesel oil 5.9 qt
fuel tank 6.3 gallons

Batteries
2 x Optima Yellowtop 51R

Panel Rivnuts
39101-76030, AVDEL, EURO HEXSERT 39101 INSERT M6

The AMMPS units use a lot of commonality of parts.
 
Last edited:

mciikurzroot

Active member
Supporting Vendor
153
231
43
Location
wimberley texas
Bingo !! we have a winner, perfect timing, Thanx Daybreak, im just back from NAPPA with the 1344 oil filter and will spin it on and see how my water temp situation goes, after more reading the -24 im leaning hard to the T'stat not opening till much later than desired, and PWM cooling fan might have issues, time will produce the core problem and a answer as well, fortunately cooling issues are typically easily solved.. Thanx so m uch for the reply and solid info .. mac/mc
 

Hmvpartsupply

New member
2
0
1
Location
Vancouver wa
I have a unit with a brand new engine and everything in it it was dropped on the side and they rob the control unit off of it but I’m going to be putting it out if anybody’s interested in parts
 

Guyfang

Moderator
Staff member
Moderator
15,826
21,990
113
Location
Burgkunstadt, Germany
Same suggestion here. Put the info in a spreadsheet and lock it. We can make it a sticky. When you want to update it, unlock it, and fix things. Relock it.
 

Jasonrs4317

New member
14
14
3
Location
Concord nc
I need some help with my Mep 1040. Batteries are charged but I am not getting the control panel to come alive. Trying to trace the electrical path to hopefully find a fault. Any help would be appreciated.
 

Guyfang

Moderator
Staff member
Moderator
15,826
21,990
113
Location
Burgkunstadt, Germany
Jason, what you need to do is start your own thread. Call it "MEP-1040, wont start" or something like that. This thread is about part numbers. Your getting help in this thread is slim and none. And slim left town. If you need help starting a thread, say something and we will help you.
 

CallMeColt

Well-known member
Supporting Vendor
901
1,256
93
Location
Wilson County, Texas
Anybody come up with a nice list for the body hardware like the TQG's? I just got one of these finally & it's I need of some. They're pretty specific. If not, I will figure it out eventually.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks