• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. dodjh

    M38A1 fuel sending unit

    The JB weld worked fine on the sending unit collar....tank is back in and I'm working on installing and hooking up the new fuel gauge. I have a wire from the top screw on sending unit to the 's' stud on the F. gauge. For a ground, I have a wire running from one of the five sending unit screws...
  2. dodjh

    M38A1 fuel sending unit

    Alright, I wasn't sure and didn't want it to get in the screw holes for the sending unit. If you used it on the bottom of a tank, I shouldn't have any problems w/ this since it's on the topside. (providing I clean everything well) Thank you for the replies NDT.
  3. dodjh

    M38A1 fuel sending unit

    NDT, do I need to fill the cavity in the tank w/ JBW or just where the rim of the collar meets the top of the tank?
  4. dodjh

    M38A1 fuel sending unit

    My '53' A1's fuel tank sending unit collar, has to be re-installed. I was in the process of replacing the sending unit and noticed the mounting collar was cocked and not flat. I was able to remove it but know need to re-install it. The tank is drained of fuel....what is the simplest method to...
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks