Search results

IN

Garwood 20,000 lb winch. Need left hand roller guide bracket. The TM 55-2320-211-15-1 shows' the steel bracket as 7409804-1. For those that followed my escapade on the cable tangle... Wait.. there's more... Still cleaning up previous damage done to our winch. When I was under the truck...

Found the paper work from the forest dept. 1971 Yes the Garwood 20,000

Winch on Kaiser is fixed. A winch manual is in the glove box. It actually wasn't that difficult when using the instructions and some help from people who have experience. The come along did the job. Once the hook and chain were clear I could run it out by hand. And engage the dog. As...

I was told it is 1500. That may be a approximent number. It is the tank from the chasis of our previous tanker. There are no pumps. it carries 1 fold out dump tank and one hydrant hose. Its not baffled. Yes, we are ALL aware of that danger. And have been trained accordingly. Just as a...

No

Ha Ha I about fell out my chair laughing at your idiot quip under your question. Right up there with the Peter Principle. Well here in the USA we don't have natural selection. My parents were missionaries in the jungles of Peru. SA It is really hard to communicate with people that don't...

To all, Sorry if I didn't respond earlier to your post. I am still getting used to the format here. I respond and it goes to the very bottom. Whether that is 100 pages later. I am used to a response attached to what I responded to. So a lot of good info I didn't see as there was 2 pages...

Good video. Mine is a bit different but all the same stuff. Now were do I sign off that I have taken this "computer based training"? :driver:

I didn't like that idea either. Its right up there with using "bor hogs" (channel locks) on a cannon plug.... eww So glad ya'll gave me so many good ideas.

More excellent info. Any one need a brand new snatch block with 4.5 in pulley?

1500 gallons

Thanks. Our "experts" ha ha ha First name : Bubba Last name: Hammer I am a just retired airline mechanic. We have our hammer tec there too, but not so much. ( Hey Conan, that bolt you just beat the F.. out of cost $4000. ) I try not to force anything. Air plane stuff is REALLY...

Thanks got it now Printing...

1500

Really good info guys That DID have me confused.. See picture of winch control placard. I have a single lever for the PTO. Its really sloppy. This I believe is what really got me in trouble to begin with and I didn't have second person to watch. Still working on finding that manual.

Thank you for this info. Ok at 29:1 that is a lot of cranking with my ratchet at 1/2 turns. I cranked 5 or 6 -1/2 turns so that wasn't near enough. Now that its broke loose there is not much resistance. If I put a impact on it will that damage it? I also have a 1/2 battery drill. I could put...

The hook is still caught around the steel horizontal brace across the back of the winch. Its in a impossible location to get to with any kind of prybar. Several people have tried. I got enough rotation so the cable is relaxed but not enough to get the hook unhooked. With everything now...

Its supposed to rain all day today and then snow and ice storm friday. Probably won't get back to it till Sunday. Its will be clear and 50. I will let all of you know.

It was one of the suggestions. It worked great. Thanks to the suggester.