Search results

  1. Godspeed131

    M35A2 converting to super singles

    Ahh good to know thank you. I’ll keep an eye on it and get some correct hardware
  2. Godspeed131

    M35A2 converting to super singles

    Also one thing I might add is when you are swapping the hubs over if you are is to throughly check the wheel studs. Out of everything those six buggers are the weak link. Which the age of the truck they can be stress cracked. I found four between my front two hubs cracked visually, and quickly...
  3. Godspeed131

    M35A2 converting to super singles

    I’ve not had a issue with them so far and have used it quite a lot here on the farm, but I don’t plan on ever taking them apart for anything and have applied torque strip on them to watch any chance of loosening. On the torque I don’t have the exact spec but I believe I went somewhere around...
  4. Godspeed131

    M35A2 converting to super singles

    @Metalpoptart I went with 2.75 in long ones with mine. I’ll post some pictures, they were perfect but just barely long enough. All depends which wheels you have. More than likely you have the aluminum ones but there are steel ones also. The steel are a thinner hub area compared to aluminum. If...
  5. Godspeed131

    M35A2 converting to super singles

    @Metalpoptart Yea I read about the caster suggestions when I singled out mine last year to the 395’s. When I did convert mine at first it did feel a little “Squirrly” on the highway compared to Stock. It did wonder in the lanes, but all I did was drop the tire pressure down from 50 psi to right...
  6. Godspeed131

    Hello from New York

    Great looking truck, got some things that stand out in a good way. The front lockout hubs, the hard top, and the drop sides are awesome pluses in my opinion. That’s three things I’m slowly gathering for mine. Only thing that I’m curious about is the bed. Seams to be a converted 5ton bed unless...
  7. Godspeed131

    Landing leg jack maintenance

    Personally that’s my go to grease for mostly everything on the farm for work or play
  8. Godspeed131

    Just spitballing...winching out your own deuce while alone.

    Just curious if it would still hold true with a larger size tire, or if it would still be negligible? In Example like my truck that went from the 9x20 to the 395’s would the larger diameter tires change the ratio enough to cause a issue like overrunning the winch speed or would it still be...
  9. Godspeed131

    Inline pump

    @Computerdoc08 I had one with the pump side gummed up that I thought was repairable so I sent out a email to Olympia www.occorp.com and they responded back with this “The fuel pump you are referring to is our p/n 311389-1. We can supply a new one to you for $400. The fuel pumps are sealed so...
  10. Godspeed131

    What did you do to your deuce this week?

    Thanks for the compliments. I have been debating since I’ve done the swap wether to paint them all black, or leave them sand . The other half says she prefers the current look, but I think I’d like the all black look. So now I’m at a stand still. Currently have a hardtop under restorations...
  11. Godspeed131

    MEP-802a leaking fuel.

    I just did the above today on a new set I acquired a few days ago, worked great
  12. Godspeed131

    What did you do to your deuce this week?

    It’s been a little over a month since I’ve had it out, so took it out today to stretch its legs. Somewhere around a 30 mile round trip to the parts store to pick up some new fuel line for a 802 gen set I acquired recently. Also prolly the first picture I have of it with its new cargo cover on it...
  13. Godspeed131

    Deuce differences

    Got this off the ole inter web but as you can see where I circled, they sometimes installed them in the small fixed triangular panel.
  14. Godspeed131

    What did you do to your deuce this week?

    Hey just curious to what trailer were you pulling with the m35?
  15. Godspeed131

    Big Sandy River Tn?

    If any future help is needed I'm located right in the tri-state area where TN, KY, & VA meet. its a little east of everyone but still able to help if need be.
  16. Godspeed131

    What did you do to your deuce this week?

    Your not alone when i swapped over to 395's with mrap wheels i removed my tool carrier and spare tire carrier. I haven't decided what i want to do yet. i have decided on three options 1 modify the original tire carrier for the 395's, which I've read how to do on here, 2 add another step/box...
  17. Godspeed131

    Dual rifle dash mount source?

    I had thought about using some sort of rubberized under coating spray or maybe even plasti-dip on my lower mounts.
  18. Godspeed131

    Winch Questions

    Maybe there's thick paint hiding a 1 in front of the 1/2 :LOL:
  19. Godspeed131

    Duals with flipped hubs

    Here’s with the hubs flipped out on my m35a2 like the A3’s and above in the last picture of post 21 is stock “flipped in”
  20. Godspeed131

    New to the forum

    As fellow new member, welcome. I joined a year ago next month. The people here are #1 great people and #2 a wealth of information. I too bought a m35 and am loving it. Only advise I can give on here is, people on here, including me love pictures. Also don’t be afraid to ask questions, but as...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks