Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
A 7/16" wrench and monkey arms.... or Soldier B...? :razz:
It's kind of tricky but you should be able to reach/hold the nuts after folding up the WS. Removing the instrument panel makes it easier.
G.
OK, THANKS A LOT, AceHigh!! :beer:
(man, you didn't have to go out in the rain just for this, hope you don't get a cold...!)
It appears to me that to gain space they have moved the grille forward all the way almost touching the bumper? That would be 2.5 inches, looking at a stock A2 here...
A bit off-topic already, i know....
..... tried to find that thread last night where we had this A3-hood discussion already....
here it is: http://www.steelsoldiers.com/deuce/23656-m35a3-pics.html
See my post #18...... tape measures must be scary things to use since so many A3s are out there...
Depends where you measure....:) (drawing below)
Yes, the cowl remained untouched so the hood is the same width at the back but the nose is wider, since the grille has been widened also. I think it's two inches added on each side but I don't have a A3 hood here for an exact measurement.:(...