Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Im leaving tomorrow. Repacking the bearings took too long to get everything else done. I have to make an alcohol snifter, so my brakes don't freeze too. Im going 70 to Amarillo, then 40 to 44, to 70, and 75.
If anyone is along that route let me know.
Voy a tratar. I drove 100 miles today on a parts run, then adjusted the brakes. One seal was bad one not so good. We are repacking all 4 to be safe. The truck runs just under 60 mph around 2300 rpms, which it seems to like. I ran 2400 but it gets loud and hot. I did the same trip 4 years...
I tried to balance the front tires today. The truck shop wouldn't touch them. I got some beads, but haven't had it on the road yet. I will be packing the rear bearings tomorrow.
I am in las cruces now. I put a heater in the deuce today. I need to put a pinon seal in the 1008 tomorrow. My sister in law is riding up with me. She has only ridden on the troop seats for a short trip to the park down the road. Im planning on leaving on the second and heading north NM, OK.
I will be flying to El Paso, TX on 12/28 to pick up my 1008 then driving to Las Cruces. I need to do a few days work on the deuce, then I am heading north around the first. If anyone wants anything moved let me know. Both trucks will be empty. I don't have a set route. I can go north...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!