Search results

I have the GM straight bracket I had to order cause original was wrong angle. New knurled bolts too. Going to modify relay today

I have a new starter coming under warranty. Going to try that. Thanks

i pulled plate down and no damage or irregular teeth wear. everything looked good. i Have new starter bolts and the straight bracket on front being used since original one will not work.

I'll try inspecting the solenoid, all i did was remove starter down, then back on, then when i went to turn key, nothing, but when i turned dampner over it started cranking, i disconnected batteries and cables, solenoid was really hot, i'm going to see if i can get the starter under warranty...

I have a new starter installed it and had it stick on (with key off even), quickly disconnected the batteries but hopefully didn't damage anything? The solenoid was hot (temp). Only thing I did was remounted it. Is the doghead mod the fix?

No Smoke, And i cracked #1 line at injector and had fuel there.

I have a M1008 with just over 14,000 miles (Ft. Hood TX). The issue i have is one day it ran fine, next no start, just crank and crank. Checked following: 1. Confirmed 12 volts going to glow plugs (has been converted to push button) 2. Installed new glow plugs 3. Rebuilt alternators 4. New...