Search results

sweet thanks. So where did you buy yours and what did you pay?

so it should have the blue on the left side and the red on the right side? How does the emergency one work any way?

so the pressure line from the compressor is plumbed directly into the ad-9 or ? Explain that again. maybe draw a pic?

yeah mine is a 1986 model so it has two glad hands

i see, so what are the ones on the m105?

the ones that are on the m105 trailer side are universals too?

so on the truck side of the trailer brake glad hands are they a special thing or just regular old glad hand receptacles? I see they have pipe thread that goes into a through frame fitting and has a shut off valve, so it looks like i only need the glad hand part

thats what i was thinking but, there is going to be the battery issue. Could the civy seven prong trailer plug provide enough power to run the pump without a battery system figure the pump pulls 400 amps ? What do those put out for a charge? Here is the trailer plug i am talking about Connector...

bump

this is being discussed further here https://www.steelsoldiers.com/threads/m105-dump-bed-trailer.39927/

this subject is being further discussed here http://www.steelsoldiers.com/deuce-modification-hot-rodding/39927-m105-dump-bed-trailer.html

the pump is way over sized because its set up for volume not pressure. The system works on 13 psi or less! The air bag is like 16-20 inch diameter so it makes up for the pressure with its huge size. These guys are very evasive which sucks because i think that they really do have something sweet...

what about the stock duece rims? Whats wrong with those for mounting the t831's?

that is awesome. They want a fortune for a knuckle crane with half that capacity up here! found a "cheap" one for 4500 bucks, thats more than the entire truck!

so who here has install an air dryer and filter system on their truck? I thinks jones did one on the baby hemitt, a bendix ad-9 i think so where did you mount it? when does it hook into the air system? Im going to be doing this on a bobbed duece

just got an email back from them, they will not separate the kit and only sell me the airbag and hing assembly! which sucks because we already have on board air!

yikes the led lights are looking more and more beneficial everytime i consider them. Truck lite got back to me and said that their universal led trailer light kit is for 12v only!?

so my air shift transfer is leaking on the case body seals etc and i need to know if the available kits from saturn surplus etc are worth it or if there is new ones available from like napa or something that is better?

so im thinking of converting the rear m105 trailer to a flat 4 wire with a led light kit that is similar to these ones Overton's® > Optronics Waterproof LED Trailer Light Kit, that way i can run it behind the bobbed duece or a civy truck

This would be really handy to have, im trying to figure out how to make it a dual voltage unit if i go electric over hydraulic, but then this little gem came along Load Hog Industries: Truck Accessories, Parts, and Bed Systems. Not so set on it yet though as it only can lift 4500 lbs and a yard...