• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M

    mep-831a suspected K8 relay fault

    That would be a big help if you could find the K8 relay, I tried to remove the back panel of the inverter, removed the screws but it wouldn't budge, even tapped it with a hammer.. I guess I could install a smart gen auto start unit and it could be the brain and let it manage all the fault...
  2. M

    mep-831a suspected K8 relay fault

    Hi all.. was able to get the inverter out, what a royal pain..the bottom bracket bolts were threaded into inserts that all snapped at the shoulder..had cut the vent holes out and get to them through the bottom of the unit.. Went looking for k8 relay, there was a relay on the top circuit board...
  3. M

    mep-831a suspected K8 relay fault

    Hey Guys I have purchased a mep-831a with a tier two reset with 7hrs showing on it, the circuit interrupter will only work in battle short. The governor control module is shot, I have one of Kurts boards on route to solve that. I was able to get a stable 240vac measured at the inverter with no...
110,139members
164,855threads
2,319,170posts
929online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks