Search results

It will continue to run if I press the battle short switch S7, but no lights come on. I did press the reset on the over speed switch, it did not seem like it was tripped, and I’m getting continuity through it

Yes I am using the schematic in the TM and also the same one that is attached to the door

I’m not getting 24 volts to the oil pressure switch, I’m getting 24 volts through K2, but lose it before it gets to the oil pressure switch.

First let me thank y’all for your quick response and advice, I’m new to this site and it looks like everyone is quite willing to help. I’m an electrician by trade, but not familiar with this generator. I will search the manual I have downloaded for this generator for the oil pressure sensing...

It has oil pressure on the gauge

I have an MEP006A that when I first got it, it started and ran fine produced 120/208, but the frequency was low it took me a while to find the throttle, and when I did I opened it up to wide, the generator shut down on overvoltage and now will not stay running unless I hold the run/start switch...