Search results


    Finally 24 bolt whls

    after having the wheels for 6 years and the tires for nearly 2 I finally got around to putting them on the truck. Hopefully no leaks

    One helmet Akron Oh

    Anyone willing to pick up and ship an army helmet from an auction house in Akron OH. They will not ship. Of course I will pay you for your time and shipping . Chuck Herbert 478-918-7490

    halftrack back from an outing

    Had and opportunity to get my track in a little show. Not fond of how they aged it but should wash off. Ran well all day. Also was the first time I moved it with my RAM 3500. Truck handled it very easily. pic before the dirt then the rest

    Anyway to increase thread lines over 20

    Like the new site. is there a way to increase the number of threads shown per page over 20? The old one I could get nearly double I think

    Lawrenceburg KY anybody near there?

    I need a sign picked up in Lawrenceburg Ky if anyone can assist . I can come pick it up in few weeks. It’s 73x48. Maybe 1/8 inch thick. Overnite trucking sign possibly take to a fastenal store. Off course I would pay you for your time please let me know if you can assist .

    44 mb

    Found this little jewel in North Ga today. Don’t findem like this to often. A real WWII JEEP. The cut down 151 windshield is pretty cool.

    Identify this trailer with M108? and Honest John Rocket

    Anybody know what this trailer is? Honest John Rocket transporter Has what appears to be wheels from a WWII M10 ammo trailer or halftrack.

    M35a2. u bolts source

    Anyone have a source for a set of u bolts for a m35a2? Are the specs listed anywhere to have them made. I could not find them. Rough measurement is about 13 inches long . i need them for the rear of a m108. They appear to be same as the front of a m35a2

    Torque rod axle alignment best way

    I am in the middle of the job of replacing my torque rods . The drivers side lowers went on fine . The passenger side is a different story. I need about half inch of movement I think to get them installed. The old dog bones where almost completely worn out so I’m thinking I just have had...

    R985 radial engine Pratt Whitney

    While not an airplane I thought this may be the best place for this. This has been a side project I’ve been working for while. A friend of mine is a full time picker for his occupation and from time to time I’ll tag along . Last fall on one of the trips I came across some radial engine parts...

    Broken inner budd nut

    There’s always one. Got all of the lug nuts loose but one inner budd nut. The end broke clean off. Other than buying a $70 tool to remove it what’s the best course here?

    Data plate set

    Any recomendations for a data plate set. Thanks

    Replacement fuel lines

    Looking at replacing the copper lines on one of my trucks. Searching through the forum there is a lot on replacing return lines and the use of nylon air lines . Any opinions on what is best to use in replacing the main supply line from the tank? Can you use a 3/8 line to replace the 1/2...

    Modern 24 volt alternator install

    I’m not reinventing the wheel here. I know this has been done many times but I never found a thread here that really covered it. I’m sure if you talked to 5 people you would get 5 different ways to do this. I found a lot of information on how to from the following web pages ...

    M series 3 lever light switch cannon plug

    I have a this deuce I originally bought for the winch to put on another truck. Anyhow it runs so well I’m thinking of keeping it for a while at least. About the only problem I have found with it is the lights do not work. I disconnected the cannon plug from the switch and used a jumper...

    Need a M35A2 hauled from Charlotte NC to Warner Robins Ga in next 30 days

    Need a M35A2 hauled from Charlotte NC to Warner Robins GA in the next 30 days. By 1/31/18

    C45 Prop

    While not a whole airplane. I think this is the right place to post. I wanted to post a pic of a project I have been working on for a while. This is a prop off a C45 expediter . Turned out pretty good

    Good local OD spray bomb paint?

    Working on an old engine stand to mount a c45 prop I restored for display . Any suggestions for a decent OD spray paint I can buy at Lowes, Ace or similar? i normally use Rapco or behr but this is not a vehicle and will be inside . Don't want to go to the trouble of setting up a sprayer and...

    M118 trailer from KS to Ga

    Looking to have a m118a1 small flat bed trailer hauled. From Ks to Ga. 900 miles. The trailer will fit on a standard gooseneck. Weight 7200 lbs


    I posted a wanted ad a little while for a M275 of any variant. NDT turns out had a very nice example. Truck should arrive tomorrow if all goes well . Stable mate for the m108. Yes I like odd m44 series trucks. thank you to the other members who responded to my original post .
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks