Search results

While looking at something else unrelated, I came across a discussion on here a while back regarding a type of side/mid mount winch installation. Unfortunately I didn't bookmark it and cannot now seem to find it again. Basically the cable started at the winch ran along the frame to a fairlead...

Took my Air Dryer apart, cleaned the components, washed the media and checked the heater operation. I did not strip the purge valve as it is operating OK and the canister only had a little bit of emulsified oil in it. https://youtu.be/nx9ElpOz2Zg

After a little measurement I came to the conclusion that Toyota door handles from a second generation(90-95) Toyota 4runner will cover(barely) the existing A0 door handle holes. Those from the 3rd gen(95-04) should also fit. The fronts have locks, the rears do not. I opted for the rear handles...

Ok, so my CTIS ECU is a brick with 5 solid lights and if I spend too much more on this project my wife will probably bury me in it:) That being said, I am also a bit of a control freak so I am converting to manual CTIS. I have looked at the valve and regulator method but decided to go about it...

I won a GP bid this morning for a M1079 cab and chassis in Lakewood WA. I have a local guy who can help me trailer it home, does anyone know exactly where the lakewood vehicles are located? Now the fun begins...:)