Search results

Thanks i will ask him.

Yes, I know the wiring diagram ;-) this is the wiring diagram I used but it doesn't fit 100% to the new engine and the wiring harness.

It was a lot of work to wire everything, especially because I didn't have a proper wiring diagram. And I think wouldn't do it again [emoji3] If your customer has any questions, please contact me No the engine and the gearbox were not damaged The only thing broken was the oil filter housing and...

Thanks for the info, I've already swapped the engine and it's running perfectly. The communication between engine ecu and transmission ecu works without problems. All important data such as throttle position and enginespeed are recognized by both control units.

Why do I need the transmission from the A1? The Allison 3070SP also works together with the WTEC III Controller on the CAT C7 The ECUs communicate via J1939 and both can do that, so I don't think it's necessary to install the Allison 3700SP.

Hello Ronmar thank you for your help. The engine is from a 2008 M1093A1R with 350HP I tried to trace the cables.The cable with the yellow sticker is the supply for the control unit and the other cable leads from TL 110 to TL 112. If I want to start the engine I have to connect the cable TL 111...

So here are the pictures,

Hey Ronmar, The cables are located on the left side of the engine.The TL 110/111 cable comes from the plug on the engine control unit and is approx. 6ft long, the TL 112 cable is approx. 2ft long. I can also take a picture if that helps you.

Hello all, I'm about to change the engine on my LMTV. From a 3116 to a C7 I noticed that there are 3 cables on my engine that don't show up in any wiring diagram. The cables have the numbers TL 110/111/112. Maybe someone can help me out and tell me where they need to be hooked up. greetings...

​Hey Awesomeness, i removed the cable from my LMTV because I change the engine, if that is still up to date I can measure that for you. Please excuse my bad english, but I'm from Germany:D ​