Search results

  1. WillWagner

    Canadian Mk l Bren Carrier parts help

    Yup, unless someone has NOS stuff, Mc master and solder will be my friend
  2. WillWagner

    Canadian Mk l Bren Carrier parts help

    Not a member there, I will give that site a try. The switching valve is indeed on the suction side, mounted on the bellhousing. Took it apart and found that the tapered valve is a tad scored and the top seal is almost non existent. I believe I can repair the valve. Worst case for the strainers...
  3. WillWagner

    Canadian Mk l Bren Carrier parts help

    here are a few pics, in one, you can see how the screen attaches to the pick up.
  4. WillWagner

    Canadian Mk l Bren Carrier parts help

    No good pic, It was pouring and I left early. They are mounted on the pick up tubes in both tanks, apx 1/2 diameter hole in the brass ends, the pick up tube runs through the screen. Held on the pick up by a cotter pin. They are apx 3 inches tall x 1 1/4 in diameter. I'll see if Craig can take...
  5. WillWagner

    Canadian Mk l Bren Carrier parts help

    HELP!! Getting the carrier up and running is requiring some parts. FP looses prime, no adjustment on the idle circuit on the carb and the filter is full of.....stuff. Got the fuel pump part handled, Then and Now put together a nice kit, Got a carb kit on the way from The Carburetor Shop. One...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks