Search results

  1. Artisan

    Cat 7155 tranny

    Does the TM show a spacer? I do not remember seeing one... Do good research...measure twice, install once.
  2. Artisan

    Cat 7155 tranny

    Warden, I sent you a PM, no reply. I asked several questions, no reply, UNLESS you included a response in your monster paragraph replies w/o CAPITALIZATIONS and proper grammar, like paragraphs etc. No one likes to try to read that. Still no pictures... For all's we know you are driving a...
  3. Artisan

    Cat 7155 tranny

    www.mcmaster.com Do your research...
  4. Artisan

    Cat 7155 tranny

    I think I use McMaster's P/N 1298K54 AIR LUBE AF Good down to -60F
  5. Artisan

    Cat 7155 tranny

    Is your hand on the shift knob when it acts up? The oil fill check is on the PS, follow that tube down to the tranny to verify. That thing has TONS of little O-Rings and other devices that will benefit MUCH from adding a good O-Ring oil into that tube behind the tank R Racing told you...
  6. Artisan

    Cat 7155 tranny

    Do NOT use the jake brake under I think it is 1250RPM. Read the manual to confirm this AND always CONFIRM anything I say Warden.
  7. Artisan

    Cat 7155 tranny

    Pics do not show Warden...
  8. Artisan

    Cat 7155 tranny

    PS, I would invite you to peruse my thread "ARTISAN'S M916" I think it is in post #4 I showNtell how I implemented R Racings Air Filtering, Pressure Regulating, Oil Misting devices w/ pics no less. But still we need to se pictures of your rig...
  9. Artisan

    Cat 7155 tranny

    I would take R Racings advice and start pumping some quality O Ring oil into that puppy and massage it / run it and see if "Use" brings it around... PS, can you please post up pictures of your truck? What is this OVER TEMP light you speak of? I think we need some pics... Do you have a link...
  10. Artisan

    Cat 7155 tranny

    PS, I have grounded my trannY temp wire to ground under the truck and my TRANS TEMP gauge in the cab PEGGED OUT. To date I have not been able to get any TRANS TEMP either! I am now wondering if the Teflon tape on the threads of the trans temp sender ( I even bought a new one) if it is...
  11. Artisan

    Cat 7155 tranny

    OH, Warden you do know where the access panel is to do what R Racing suggests yes? If you have a new floor mat you need to look for the access panel then CUT your new floor mat... Basically it is straight down from your Ratio Selector (Shift Box) MAKE SURE THAT PUPPY IS CLEAN BEFORE YOU PULL...
  12. Artisan

    Cat 7155 tranny

    Warden, SS Member R Racing is our resident 7155 Officianiado' . He is the 1st person I would go to if I had an issue. I took R Racing's advice and added the pressure regulating, air filtering, oil misting devices he dreamed up FWIW. I am watching trying to learn hear myself. REGARDING...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks