Search results

I have learned that having extra parts On Dana 60 front axles depending on use, it is good to keep extra pairs of nylon bushings in der werkzeugkasten. On my daily driven D30 K30 trucks I change out the bushings every few years. Bushings are cheaper than rubber. And finding the bushings are...

IS it possible to pin a Scammers Warning thread at the top of the Parts Wanted Forum? If it saves one person grief then it was worth the effort. And sometimes it will push the scammer somewhere else.

Gov Planet has a 6X6 that has 10 miles on it but does not say what year it is. I want to say a mid 80's model? 6102971 3K for it but looks like its been sitting forever. To bad it does not have a bucket on.

Good Luck 7ton Take apart and clean out or replace defective parts.

And read rusty's response as that having it plugged is not good to keep it clear. To which 7 ton knows it is return orifice. Wow try and be helpful and this is what happens, turns into what "is is".

WWAAATTTT? Is there something that I replied that was some kind of misdirection? Was there some editing, gringe? I read nothing about plugging. Where does that come from, and I said nothing of drilling out or can you read.

Welcome How long have you had the truck. Some background information will really help with us knowing how to narrow down what your problem is and how to narrow down on answers to your questions. Brakes are a very serious issue when not working properly. And what condition your truck is in is...

Welcome to Steel Soldiers! Check out the Forum and search around for some information on your M38. Looks like it has been under shelter for some time. Hopefully you and your wife plan on keeping and getting it moving with little effort. If you try and get it started use another fuel source...

Might be a good idea to change thread title to show updated PS Maazine or start a new thread? What do you think Guyfang?

Thanks Guyfang

And while you have the door panel off, white lithium grease is your best friend. Grease the regulator, all the plastic window rollers, tracking, or replace the rollers if not round. Grease the door closer, all metal pivot joints. Window crank, door handle, outside, inside, just a little is...

After you get the weatherstrip back in make sure to adjust window track to where there is no binding when tracking the window up or down. I use a length of smooth wood to help place the stripping without damage to rubber and help put some alignment into the c channel. Try to use the original...

Nothing wrong with buying all new product if you have the coin, but why if you do not need to. Myself if I can use the original equipment why not? Having to judge what is still good to reuse is only but observation. Why spend coin if the original equipment is perfectly fine? The protected...

Start spraying penetrating fluid on yours brake lines. Sawzall or grinder to cut the u bolts if the threads are real rusted and buy new ones.

Many people lose sight of everyday, Living. I lit the candle at both ends plus for a long time. My MIL told me one day to "stop and smell the roses." Not knowing or understanding what she was showing me I put it in the back of my mind. Then one day I understood completely. And it was there all...

Fair question from an older thread. The manufacturer has made the recommendation for equipment installed. For longevity the plate has specific information, now what happens while the rating drives depends on the task at hand. But what specifically are you looking for, PyroJoe? A challenge?

Transfer of ownership With a notarized Bill of Sale transfer of ownership is made, legally. That is what a State License Office does when transfer of ownership is made from one State to another that requires proof of sale. One State contacts the other for liens, or clear title. If the vehicle...

Well I missed the coupon but will like to thank shoptrigger for the giveaway and the coupon! Congrates to Computerdoc08 for the win.

Great progress! I have always used hand tools when working on old rusted fasteners. Usually I will pre soak a day or two before loosening. And depending on my experience with that fastener maybe several times. Galling the threads ruins more useable fasteners, and if you can not replace then a...