Search results

Howdy, Im looking for the fuel level switch for a 805a. I have tested mine and its bad. Get low fuel shutdown immediately after start.

Im in

We all want to do away with the filler neck, but a drop in is best imho. A little spilled coolant is not worth the extra hassle. I try to rebuild the ones that come up banged up.

Youre gonna hate her when she starts bitching about doing the scheduled maintenance and the prompts dont go away and the shutdown counter wont start. Pro tip, after you clear the maint warnings, hit fault reset on the panel so the get programmed in. They all come back and start from zero if you...

Shoutout to the guys at www.fulltorquedriveshafts.com for the fine custom job.

Just replaced these avrs. The 60kw has an over voltage issue and the 30kw has an undervoltage. Id rather someone try and fix them or i will toss them. Just send me a shipping label.

Thanks. I contacted the ebay guy.

So i bought a 1070 that had a little short circuit and burned alot of cables. Im looking for the harness/cables from the breaker to the starter to the alternator and the starter solenoid. Anyone parting out one?

Its in caldwell Idaho right now. Id rather swap it for a 6.5 na but i need to get it running either way. Looking for options but its going to the east coast regardless. I have spoken to RWH and he is trying to source a 6.5 for me.

Im willing to ship it. Its in Idaho.

Hey guys. Im looking for a shop that can remove,rebuild ammnd reinstall the engine on my m1097. Any recommendations?

After I pulled the bell end and tested the diodes with no issues I started pulling wires and found the culprit. The customer had a very unbalanced panel and it overheated l1 right in the back of the contactor where it could not be seen. When i tugged it came right out. Boy was I pissed. That...

This is a new one for me. Got an 805a running great for a month and suddenly L1 shows 25vac. L2 and L3 have 120vac each. Anyone have this issue? Im thinking diodes.

So for the first time, I have decided not to bring back an 805b I got with no control panel to stock. I am in the process of stripping this unit of all original electronics and decluterring. All the parts I will keep as spares since i currently have 3 stock units deployed. My plan is to install...

Howdy folks. Im looking for an original or alternate fuel level sender for my 15kw unit. Does anybody have the ohm specs and depth of tank handy so I can search for an alternative like Callemecolt did for the 802a? Thanks

I wanted to update this thread with another alternative for the coolant bottle that worked for me. The only issue was getting the hoses to go into the bottle and radiator filler neck. https://a.co/d/j1nonjK

I refurbished one a few years back. Replaced the bottom and top seals.

I think cucv are keyed alike. If you have one then you can open them all.

Didnt know you were a skater. Nice vans.

Anyone have mounting brackets for the evaporator and condensing units?