• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Csm Davis

    XM971 Rebuild and Camper Mod

    No haven't finished it my projects keep getting pushed back
  2. Csm Davis

    Steel Soldiers giveaway sponsored by DavidDoyleBooks.com

    In
  3. Csm Davis

    Wrecker bed modification

    Couldn't you flip the intake adapter and get a little less angle on your tubes?
  4. Csm Davis

    Steel Soldiers giveaway sponsored by CTC Surplus Tires

    In
  5. Csm Davis

    WTB: M936 Winch / Crane Traverse Motor

    Go ahead and pull it and check the coupling bet it sheared a key or pin
  6. Csm Davis

    Cummins 6CTA8.3 Injection Timing

    I have a straight pipe on the wrecker and it is not terrible but if I were to change any others I would use a cheap straight through flow muffler.
  7. Csm Davis

    M923--air valve on front axel lockout valve leaks

    Take it off and just use the switch on the dash to engage the front axle, it will allow you to use low range rear drive only for use on hard surfaces like in a parade.
  8. Csm Davis

    Stock air ride

    Arise long dead thread! I just realized that all of these military conversions have S-cam brakes!
  9. Csm Davis

    Steel Soldiers giveaway sponsored by SECO

    In
  10. Csm Davis

    Wrecker bed modification

    You cant just drop these photos and not give us some dialogue about it!
  11. Csm Davis

    Broke down in Picayune Mississippi ... Need a lowboy to haul back to Louisiana

    Thanks but I am so far behind I need the Hubble telescope to see half way to the front. 😂🤣🤣😂
  12. Csm Davis

    Broke down in Picayune Mississippi ... Need a lowboy to haul back to Louisiana

    It's everywhere!
  13. Csm Davis

    Broke down in Picayune Mississippi ... Need a lowboy to haul back to Louisiana

    You are welcome to call me and we can help you fix, store, and, or haul it. Tim is not in any shape to help last I talked to him.
  14. Csm Davis

    Anyone commit sacrilege and weld 16.5 inch rims to convert to 17 inch rims?

    Was being smartass, but you are overlooking the inside of the bead. It will need to be raised also. The safest and probably cheapest would be to buy some 17" shells or junkyard steel wheels and cut and weld them to the humvee 16.5" wheels.
  15. Csm Davis

    Anyone commit sacrilege and weld 16.5 inch rims to convert to 17 inch rims?

    Why not go up to 20" and use Hemmet rims?
  16. Csm Davis

    M936 Wrecker Boom - Replacement Winch Cable - What about Stainless Cable?

    Juan I would suggest using a standard cable lube then apply the coating that Simp has suggested. I am fairly certain the military used cosmoline. https://www.cosmolinedirect.com/
  17. Csm Davis

    M936 Wrecker - Better Plumbing Guide for Hydraulics?

    Steam and dawn dish soap works pretty much on everything. And it won't damage anything most of the time.
  18. Csm Davis

    M1007 - CUCV Suburban Clone Build Thread

    Are you still running humvee rims? If so 65 psi sounds a little extreme, maybe do the chalk test. Most of the humvee rims are stamped 55 psi max.
  19. Csm Davis

    Wrecker bed modification

    Almost every wrecker i have seen has been modified in some way or other. Very few were left bone stock
  20. Csm Davis

    Expanding trailer body removal

    Who has experience removing the body from a exspando van?
110,879members
165,309threads
2,326,163posts
1,432online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks