Search results

I really am happy with the springs. I can't remember part number but yes armada springs part number as recommended to me earlier. I would cut 1 1/2 coil for front and cut 2 coils on rear. I haven't changed shocks yet. I'm told they will make a big difference and am inclined to believe it. I have...

It's a pretty good watch. Make sure to stay for the last comments.

I'm starting to buy the individual items for a swap. I saw this dual brake switch. I know you only needed rpm and tach signal. Is there any added benefit with brake signal? I was thinking one side for 24v and other for 12v.

Has anyone seen this added to soft doors? Pic is from a for sale advert. Buyer bought this way and doesn't have any info.

I left my tar baby alone. Must be there for a reason.

I'm still researching this swap. Found this pic on a fb forum. They are saying it's the tps for the 4 speed. Could I use this setup for the 6l80 swap? I figure it is 12v. Looks like it should be a factory fit.

I called them today. They will waterjet cut to your provided specifications. They do not have any "stock" patterns. Minimum 500.00 order for cutting. The sheets were very competitively priced. I still would like to see how people have cut and covered various items. For example I saw a picture...

I've seen the 800nonoise company that sells the factory type insulation in sheets. Does anyone have pictures of how they installed/cut the sheets to insulate new areas? I'd really like to cover the hump and rear passenger area.

I have a starter I would sale. Brand new

Cold weather pool noodle

https://www.steelsoldiers.com/threads/spring-replacement-leveling-springs.205797/

File for lost title. Use seller name and your address. At this point you will have physical title to ship anywhere to seller for signature.

Can you think of any reasons why I couldn't run a limit strap inside the spring and use the 1/2 shock bolts for mounting points. I would just need to get the right length.

It was the same shop, so not sure. I'm right at 25" from center of wheel to bottom of fender. If you look in the post above it looks like the length has to be specified. Each length has a sku# I'm guessing the one with a 11-12" compressed length. I really appreciate your help. I'll call when I'm...

It's odd you say that. I was thinking that after the springs settle the rear will most likely be higher resulting from the same springs but with different weight from front to rear. I was avoiding in my head removing the rears to cut shorter and came to the idea to carefully heat the coil in...

Got the fronts installed a last week. I wasn't there for the front install but they said they couldn't the front in full length and cut 1 coil off same as we did on the rear. I haven't measured it to see actual lift and haven't driven it much. I plan to use a fair amount this week and will...

Seems like if someone added similar type fans on underside of radiator without a shroud they could provide extra cooling without restricting the OE cooling setup. They could run continuously at slow speeds in tandem with OE and intermittently at road speeds. Could prevent the hydraulic from from...

These are supposed to create twice the clamp force of parts store type. I bought two orders of these but haven't tried one yet...

I run MT OZ balanced with no run flats. To me it rides better with removed. I did replace one tire that was technically good but was out of round and didn't ride well. I will probably add pvc inserts when I put on a new set because i worry about popping tire off bead when offroad. The run flats...

Any updates?