Search results

I respect the full send. Needed more initial velocity and that concrete block not in the bed and you may have made it out. looks like your rear just sank.

I have everything except the winch controls.

ANOTHER REMINDER!!!! ALWAYS COPY YOUR CONFIGURATION FROM YOUR TRUCK AND SAVE IT IN A SAFE PLACE AND EVEN MANUALLY WRITE DOWN YOUR INJECTOR TRIM CODES!!!!!! I totally forgot and flashed the 505 which 90% of the time resets your configuration and you will have to pull the valve cover at a minimum...

Any cat et later than 2001 should work fine.

2019a works fine no problems for me.

I will have some here in a month or so when I go pick up my parts trucks. Complete cab ext.

I agree so distributing those TM's free of cost would help the hobby tremendously but in fact distribution of them at all is illegal because the a1r tm is not for distribution.

IDK what you mean by interpreting the code at all. You simply connect the adapter to the laptop and open the program you want to diagnose and select j1707 for anything but the engine which is j1939 protocol and the software will tell you the error code then you can diagnose the problem from...

I have an entire software package for free for your truck(wabaco, cat et, allison, dana) PM me your email. Only need a chinese nexiq adapter off ebay and a few hours to screw around installing the software and your off to the races.

As swiss stated before this was my introduction into the MV hobby. I thought the project of converting the truck into a dump truck would be a fantastic learning experience and taking care of the truck entirely on my own teaching me responsibility. Some of the Ideas that Ron had were good on...

Likely fell out of the crate and got banged around for 10 years.

I would take my m932a2 anywhere and do anything with it. The 8.3 contrary to popular belief is plenty fast when it is turned up with some mods and I can cruise at 72mph with 395s or 76 with 14.00s. Plenty of power to tow, offroad capability, stops good, really no complaints.

I'll nominate my m931a2 converted m932a2 with a lmtv dump bed.

Your ABSOLUTE BEST OPTION for your missing cab parts will be midwest military equipment. 14k is the CHEAPEST you will find doors and a roof for.

I can crank and start my c12 on 2 650cca batteries (it doesnt like it but it does it) and my 8.3 will crank all day on 2 group 31 batteries 1000 cca

You mean the one that was stripped until basically only an engine full of water and a cab skeleton was left?

Your jumping the wire

Take the screw plug off the bottom of the PCB and jump the two big connectors on the pigtail. Should allow the truck to start as normal.

I would like to say thank you for all of your work over the years putting on the rally. Growing up looking forward to this event every year since I was probably 10. As a yearly participant of the rally for over 10 years I know myself and others will likely still have a get together at one of...

Maybe not tomorrow but the gears are moving.