Search results

More pictures the flange for the 3 bolts is moved is the only other change I see other then no flap . any one using a 302 with out a exhaust flap ?

It's good because if you have to park on a hill you have a better brake set up .S cam with maxes is much better then air over hydraulic or wedge brakes . If you loose your fluid on a hydraulic brake system truck you still have air for your trailer .

I have a cracked exhaust manifold and coolant leaking in to the exhaust .I removed every thing to get the head off and got my extra 302 manifold from the shed and looking at them and found they where not the same .One # 218047 has heat control this one's cracked Other one # 2135490 has no...

Civilian trailer use's 2 inch king pin common size . Civilian trailer with air brakes and easy to find brake parts . Pulling a full air brake trailer behind a truck with hydraulic brakes is a good feeling . Good idea.

I know with out them the gasket seals for a short time and then starts sucking in air I found this out on a Chevrolet 216 years ago . I had no idea new ones could be found .

Do you mean the sleeves that go between the head and intake manifold

Thank you for your information ThatXJGuy. I will be looking for a overdrive transmission.

Thank you for the information . On the tags I looked at I was looking for 6.44or 8.88 I will look again . 39 MPH seamed slow it having 6.44 gears .

Made this tool for a 5 ton . It makes carrying the hub and drum a lot easier and keeps your hand out of the pinch zone when sliding the assembly back on the axle and feeling for slack in the bearing.

When in high school I worked for a man that had two 1966 ford twin screws one with a 250 with turbo the other with a 6-71 with out a turbo .The 250 pulled better . both had 4 speed main boxes and 4 speed auxillery behind it . They where old mine trucks before he had them he used them to haul...

When swapping a multifuel 6352 to a m818 6453 over drive how much speed is gained ?

Injector pump on the right front of engine I would say it's a Mack

Looking at your pictures reminds me of why I went with air . It is tough to get to the area to mount the linkage with every thing installed .

I used a air cylinder on the transfer case PTO no problems .

I did not start this thread but this is what I have . 1967 M52A2 with 11.00 20 tires when it had the multifuel it ran good at 46 miles per hour now with the Mack 673 it runs about 39 MPH with the non over drive transmission . if I change to the over drive 6453 it will help some how much ? I...

73M819 what ratio ?

The M211 /M135 transfer case dose not have a low range .It's single speed 1.16 to 1 .

When trying to remove conical washers I found out a air hammer works if used around it more to do with vibration then force . Lowes $20

Bendix pressure switch # 228750

When had to replace my switch in my M211 the local truck dealer had a new style in stock .I thought I might need one that could handle 24 volt in stead of 12 volts no problems it's been in about 10 years . I have seem them on Ebay also .