Search results

FOUND IT! TM 9-2320-211-20-3-1. It shows the rotopack and procedure for adjustment. I do have the linkage assembled correctly, the rotopack linkage adjusted properly, but, the clutch linkage is all wrong! The thing has been assembled in the wrong position, imagine that! Next week, I will un...

I also decided to tackle the rear clutch actuation. A week ago, I took the valve off. It is just an old, all brass, BW tractor trailer hand valve. I took it apart and found the seal as hard as a rock. I ended up taking the valve to a local truck parts place that I have been dealing with for...

Well, was yet another productive work week at the Museum, 2 days is a week, right? Decided to tackle the Holley issues by removing it. I am here to tell you, the last ones to work on this were idiots! SO many things halfazzed, loose, cross threaded, over tightened, you name it, I have seen it...

Yeah, but....always a but, if/when there is an issue, how is it resolved? Going through the new part return/inspection process, or, your local place? If there is an issue, the local guy takes it in, sometimes the complete vehicle, troubleshoots it and fixes it then and there if it their issue or...

No reason to buy new. a good ADS shop can make it like new or better. @Jyg101, where in NY are you, ya might want to put that in your location too, There are a mess of fuel shops out there. Google Stanadyne fuel pump repair near (location) and see what comes up.

@Jyg101 , The forum you posted in is for general website help, like how to post a picture, how does one message another member, etc. I am going to assume that you are working on a GM diesel, a CUCV or a HMMWV, but that is an assumption. Let me know what it is you are working on and I can move...

That was my life for the last 10 or so years at my prior life place of work. Also did 28 of these in the field, had DD S50 engines and repowered with QSL9. And 2 of these. Took out QSM and put QSL9. Both repowers were to tier 4 final emissions.

This is correct, as in the rears are not offset. The ones in the pic from post 13 are normal lifting or off road shackles. Remember kids, the ones that came on these trucks were non thread in pins, securing clip tethered to the pin like the image the OP posted, the link I posted or the images...

Well, I can still keep working on the seal number. I made a decision to just put it back together. The reason for this is that when I came back in yesterday, oil was wicking out and running down the snout of the crank. The oil was coming from between the adapter and crank. So, it is my opinion...

I made an executive decision. No seal. Went in today and found oil seeping out the front between the snout and adapter. I decided to give the damper a good cleaning. The damper looks like a two piece, rubber style. Meaning, there is a rubber strip between the inner and the outer pieces, BUT...

I also have the superceded TM, TM 9-2805-203-35P, which is -34P in hard copy. These aren't in the SS library as are some others we have, so, when things are done here, I will send them off to Tim and he will do his magic. I really hope that some of these older TM's will help others.

I do not want to remove it until I know that there is a replacement.

Since the rear of the truck is most of the way complete, I started on the front. But first, the seal for the swivel joint on the V cable came in. Got that installed, buttoned the throttle arm side up. Fired the beast, let it warm and tried the throttle. Man, that thing is SMOOTH! Next, tried...

For some reason, the 5T parts sheet is inaccessible to me. Needed to send a request

The Cage Code tells me it is SKF, that's all I can finger out. I did however do a bit more research. FSN transfers to NSN, which in turn supercedes to 5330-00-912-5141, NIIN 009125141. Still a dead end. @Guyfang, I looked for all of the numbers associated with 80201. The description looks like...

I got the front pulled apart in the M62 today, pictures to come in the thread on it, but I figured, since I am 3 belts and and adapter away, might as well do a front seal, IF it still available. I did some digging, needed TM 9-2805-203-35P. That supercedes to TM 9-2805-203-34P. Found that in...

No, not really. That price is right in line with the price of a 3/4 pin shackle meant for off road use. A 3/4 pin, 4.5ton capacity shackle for lifting is around 50 bucks on the low side. So, for a vehicle specific shackle with the correct pin and tethered clip, 30 bucks is pretty reasonable.

Same type, most likely different mfgr. Early ones had a round ring, later are what are pictured. Eastern Surplus has the old style with pins. And they are close to you...

I think that when the throttle is set and the the lever engaged, the RPM drops to around 16-1800 and will hold there regardless of load. That is if the governor is set and not been messed with. I think the one on this truck has been messed with by our NG friends though. The seal wire has been...

Back when I was having issues making hydraulic pressure, I had asked about what I now know it the governor for the crane operation. @msgjd has helped me out in multiple ways, hyd line fittings, pictures of linkages, etc. When I asked about the linkage connected to the governor, he stated that he...