Search results

usually 50-55mph, 45-50 w/trailer. Manstein, why the drop? You still adj the IP? JimK

http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=16224&postdays=0&postorder=asc http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=6209&highlight=m621

A simulated dogfight training took place between two Israeli F-15D's and four A-4N Skyhawks over the skies of the Negev, Israel. The F-15D #957, (nicknamed 'Markia Shchakim', 5 killmarks) was used for the conversion of a new pilot in the squadron. Here is the description of the event as...

I cut 2 slots with diegrinder and burr. Two 1/2"-1/4" towers support the threaded section. Those towers can line up with steel part in gage so you can get 90% red light to 90% white with a 90* turn of cap. I'll update post w/pic.JimK

After upgrading the LD with a D turbo I found the high EGT at lowest rpm. The 9??AM post (below) expressed the findings/reag then, and some adjustments. http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=11992&postdays=0&postorder=asc&start=20 I have been driving commercail...

Air filter restriction can reduce airflow into the chamber/exhaust. Excess air is basically inert and can be thought of as a coolant. Some [diesel] engines may depend on it for safe EGT /chamber temp. Like those running max egt... Outboard motors are (or were?) designed to run a lifetime with...

Jim H. in Abermarle NC or White Owl Surplus in Kinston.

you might find something here... then you may be in a crowd that appreciates mv's, even as scrap, more than most. JimK

The downside is the locker is disabled. The downside when enabled is often not enough to offset the benefits. The slippery winter roads road AJMBLAZER points out above may be the exception. It may be interest some, the v-100 was designed with Detroit type lockers frt and rear. Probably for...

Try placing a want ad in your local paper. Specify cheap or free. Someone may be glad to get rid of a non-runner. A local concern should keep your recovery cost low. JimK

A career welder, or proficient hobby welder, can teach stuff they can't/don't/won't in school. Unfortunately many won't have time to teach it. They may be able to offer a small bit of hands on (which is what you seem to be after). MIG can be very easy to master and you can get the hang of the...

The orange and black thing is an Alvis tool kit. JimK

pros- safer reduces fatigue(try off roading/city in 95*F/100%humidity) helps guest drivers learn to drive backing trailer easier (usually done below 5mph) better control both on road and off adds resale value may make resale easier a mod that some may consider mil appropriate adds a personal...

You are right. . This was a mistake. Thanks, ErmeyFan, for pointing it out. JimK

diconnect and charge. 10.5 means a bad cell

I'd recommend getting a pyrometer and/or boost gage even if its just temp, to check the fuel setting/EGT.It is nice to know all is well. I added a used 'D" to a non-turbo LD. With a stack muffler a light whistle can be heard as it spools up. It easily pegged the 15psi gage, and had high EGT so...

Mike, Sounds like a plan. Keep us updated. JimK

$1000. 2 or 3 rear assy left. I wonder what the real cost was with R&D... for such a small production run.JimK

The 2-1/2 ton Norwegian deuce (M621) air locker rear axle shaft

..