Search results

There is a third alternative to consider. It is the M105A3. It is an all steel 1.5-ton trailer with surge brakes. They were made in the late 1990s to about 2005. They have 10 x 22.5 tires plus a spare and a screw jack like those found on the M1101 and 1102 trailers. The original jacks are...

Macks with the ENDT-673 engine were built from 1959 thru 1966. If you have a 1975 dataplate, it is a rebuild. It will have the latest and final mods to the ENDT-673 engine. It turns 220 horsepower. The Spicer direct-drive transmissions were upgraded to five-speed with overdrive. The steering...

Simp5782 I will take you up on your offer of photos.

Custom bumper. Fits my needs. Low maintenance. Safer to use.

Six years driving an average 5,900 miles a year in my M1028A2

Gear Vendors has a great overdrive kit. Not Cheap at $2,600 but bullitproof. the 3600rpm becomes 2600. The 700r4 has its place but issues must be addressed. One might want to add aftermarket cooling. Also, timing is critical. For my money and needs, I went with the Gear Venders overdrive kit on...

This is how the Firestone 831s look on my deuce

One day you will discover there is an M54A1 truck powered by a Mack ENDT-673 turbo diesel. The later ones run at 220 HP, ovedrive transmission, power steering. I have been working on a cab off restoration since 2015. All it needs is new paint, trim decals, and its done. Its my last truck. Mack...

Pilots have been flying behind plastic windows for generations and all of it at high speeds in air filed with all sorts of particals. The very best and most efficient cleaning, restoring, and polishing products are made for aircraft. It is a three step process; cleaning, filing, and polishing...

Here is the rig that I think looks the best with your M52A2 Tractor. This is my 1970 M818 pulling an M127A1C trailer. The tractor only had 749 miles and 37 hours when I purchased it nine years ago. I have a little over 2,800 miles on it now. It makes a fine hay wagon and a good all around turnip...

The reason I asked about the engine in your 1967 truck is Mack had the contract from 1959-1966. Thereafter, the multi-fuel engine was used. The Macks when overhauled kept the Mack ENDT-673 engine with the latest updates to it. I have a 1965 M54A1 with an overhaul in 1975. During the overhaul in...

What engine is running in your truck?

They have nothing of interest to me ever. I look often but the result remains, no joy.

I looked into the roof mounted AC units several years ago. There were a few 24-volt models. I only looked at the units with all system devices mounted in the rooftop unit. I determined that a rubber mat under the unit and and additional cab insulation were necessary. The price range was in the...

They have always sent installation, timing, and testing instructions with the units I have purchased directly from Ambac.

Let me know when the new batch is available.

I built the featured system 10 years ago. I am still using it as needed. I have looked all these years for just such a controller but I have not been successful. Let me know if you find one. I still cannot caution you enough on the use of such a device. It is one thing to use something like...

I like this and your other "toys" lurking in the background.

The YouTube video planned perfectly on my computer

Thank you. The clip is easy to follow. It is a well thought out presentation.