Search results

I’ve been looking around in the TM’s and haven’t found the part number or the name of the covers in the cargo area that cover the tcm and the hole across from it where seat could be installed.

Those 40+ year old gaskets are going to be so dry I doubt the hole would still line up.

After replacing the fuel pump. Took it to my favorite watering hole 😁

Just remember , it’s a government operation. Makes no sense to anyone other than them

I can’t see even wiring them “wrong” causing them to burn out , 24v across even or “backward “ won’t do crap. Unless it’s getting 30+ Volts won’t do crap other than burning real bright for “several” seconds before going all Kodak flash,if it’s a regular bulb you should see it’s too fu@n bright...

You forgot the bag of lye to mark the field. 😜

A nice "THIN" layer around the outside of the seal should work well to fill in any imperfection in the housing just remember Its not a toothpaste loop , use your finger to remove any access sealer. Also They make a seal installing lube but i think its more for more for pressing in a seal not...

I wish i had that much luck.CA DMV says no way on highway 🍌 i would use the the middle finger thing but i don't want to get another post removed for (they didn't say but lets just say Branson) upsetting the mods more than necessary. Im am going to use dirt legal to get it done, im planning on...

Most wheel bearing grease doesn't melt till well over 350deg. , excessive heat on the hub could be just the breaks dragging , but you also posted that the boots are cracked and leaking oil , there shouldn't be oil leaking from the boots unless the seals are bad allowing the diff oil to...

I posted this yesterday in the thread sf97? Things are looking up , i also bought mine 09/02/2022 was delivered 02/02/2022. Just go this today : ( yesterday ) Dear William H, The Title certificate for your recently purchased 1998 AM General M1123 HMMWV 2 Door w/Truck Body has been sent out...

Thats a sweet find 👍 Congrats !!

Things are looking up , i also bought mine 09/02/2022 was delivered 02/02/2022. Just go this today : Dear William H, The Title certificate for your recently purchased 1998 AM General M1123 HMMWV 2 Door w/Truck Body has been sent out by Fed-Ex Ground. The details of the shipment are below...

Looks good from here 👍

Looks good. Like the rims ! Do you still have the wench ? I had one several years ago. Does it still have the gmc 302 ? It would go pretty good on flat ground with that 4 speed hydromatic. Over about 65 that front end would start to dance 😉

There’s been several posts lately on the moisture and corrosive nature on these fuels , other issues with long term storage or mostly vehicles that have long sitting storage building up algae.

I just mount the with the cracks on the inside so I get even wear on the sidewalls 🤣😁🤪

You may want to try “rocking” the bolt. Loosen - tighten wit lots of penetrant. Can you spray from the bottom up ? Soak them bolts 💦

Might be more sooner than later. 😳. Need me some of that guzzlean 🧟‍♂️

When I got my 1123 it had batts in it. One was doa and the second charged up good. I had a set of 6tl’s in my Duce , one died and the other was still good. Replaced the Duce batts with group 31’s and put the 6tl’s in the 1123, so far so good. The reason I put the 31’s in the Duce was they were...

So quick answer. No 😟