Search results

Have you pulled the ip head to make sure the button is still attached ? It migh be loose and only staying attached when the rpm’s get up there. I hated pulling that whole assembly off because it wouldn’t start. Turned ou it was the ip head button off and the piston wouldn’t drop all the way down.

Fresh from depo refurbish. Will throw in extra tank to seal the deal. Needs paint and hole repair ;)

Mine will usually blow smoke if it’s sitting at idle for an extended time and mine has a turbo.

No it will not. Only increase amount of fuel delivered. Not pressure

I would start by checking for broken wires and bad grounds. Melting the cover 😳 are you sure the correct lamps are in the correct receptacle ? The top lamp should be for turn signal and middle is for parking lights. Bottom is blackout turn. I’m pretty sure.

The only experience That I had with any sort of a V-8 replacing a straight 6 was after the V-8 had failed ( still ran but the thrust bearing was wasted ) it was in a M-211 GMC and the 302 6 was replaced with a 455 V8 It don’t have any of the low end tork the straight 6 had ( I had an M-135 at...

Using mine today as the flag holder

Never seen this before. not in a heated debate that I could see.

I think before everyone goes off the deep end on this guys poor truck , I’m sure you got a bleeder just killing 1 battery. Without disconnecting any of the battery’s I think you need a current sensing meter to see if there’s a drain. They come in different styles but something like this...

Something like this

The one I had was more of a burgundy color for seats and dash. That blank should have had a badge for Silverado or something like that. No a mv dash

I got a set for my funvee. All looked like brand new. Just ask That they send you all the Same load range. Got 5 from them, 4 were E’s 1 was a D range. Just use it as a spare anyway.

well , I understand that issue , not to incriminate myself any further , I may work and “live” in ca. for the week but I go home . I have an az address and dl now , this state that I “had” lived in for the past 60+ years sucks on every level that they can when it affects my life. I am counting...

that’s why my funvee is owned by my LLC in Montana. CA. Was a hard no , tried the historical plate way cuz it’s over 20 years old. Got frustrated and now I got perm plates , never got to register it again , just got to keep up with the llc.

I thought I thought they were all fiberglass on the funvee. 🤔 the only wood ones were on my m35 or older trailers

Put on a new top and converted it to a billboard.

That’s now the gremlins tool , net tine you hear a rattle it’s ur gremlin takin it apart at speed. 😉

That would nice sitting in front of my legion 😉

First. Wtf ?? Holes like that in the hood ?? I get where the front near the reflectors get tore off due to getting too close but wth ?? Nice repair job 👍. I’m guessing those lug nuts are on that way for the low drag coefficient. 😎

If your gonna do show n tell you should include a link 😉 I’m having a little trouble finding them for some reason.