Search results

2006 Stewart & Stevenson M1078A1R LMTV Odometer: 1,585 miles I personally drove this truck for 500 miles without any issues—no leaks, no mechanical problems. The truck runs and drives exceptionally well; I wouldn't hesitate to drive it anywhere in the country. Last serviced in 2022, it’s clean...

It’s new complete diffs, install is possible. Just send you a PM

I have a set of 3.07 in the Netherlands

I'm making them for myself not for resale per se, I have two MTVR's without doors.

Hello Folks, Last week, I bought my first MTVR, off course without doors. Spent a few hours tonight making the first design for the doors that I'm going to make. Dimensions are not accurate yet. Once I get my truck, I'm going to make a 3d scan of the cab to get it exactly.

I just relisted it. So it's available again. If you buy directly from me, it saves you $25 in eBay fees.

Can somebody explain the technical difference between the M1152 and the M1152A1. For example, does the M1152 have the Sheppard steering gear or not? The ratios is the diffs? Cooling of the diffs? I just bought a 2006 M1152 on GP and was wondering about the differences between the M1152 and...

No not at the moment. Verzonden vanaf mijn iPhone met Tapatalk

M1078A1 with a broken transmission from 17202 Pennsylvania to 21104 Marriotsville Maryland The delivery address is a residence up a hill. Cannot be reached with a tractor and trailer. Preferably a roll back.

Yes I think so, but could also be there was a green controller instead of the black one. Can’t remember anymore. If you put a green controller in a A1 truck you get all sorts of faults in the ctis and Abs.

The winch can be used in gear, forward or reverse.

Nice bottle jack trick always works , Drill a hole in the hub cover and hammer in a torch bit that you put on a ratchet Verzonden vanaf mijn iPhone met Tapatalk

Yes between the spring and edge of the brake drum. Maybe use some wood to. Verzonden vanaf mijn iPhone met Tapatalk

I use a bottle Jack to push it of. Verzonden vanaf mijn iPhone met Tapatalk

A running Argo 6x6 from Seagrove 27341 NC to Marriottsville 21104 MD No hurry 5 ft wide. 8 ft long. 40 inches tall. I’d guess about 1,000 lbs Verzonden vanaf mijn iPhone met Tapatalk

The 298-1308 is the correct pulley Verzonden vanaf mijn iPhone met Tapatalk

Not pretty sure 100% sure [emoji3] Verzonden vanaf mijn iPhone met Tapatalk

Use an 24v alternator and than make 12v with an inverter for the lights. That is done before . Verzonden vanaf mijn iPhone met Tapatalk

Without the front drive shaft you can drive it in mode .But you are limited to 5th gear. But if you have time limp home with 35mph Verzonden vanaf mijn iPhone met Tapatalk

Replace the u joint and drive it , if that is possible Verzonden vanaf mijn iPhone met Tapatalk