Search results

Thanks for posting. The P3 is the military version of the lockeed Electra. A company where I live use to depot maintenance on them. Very sturdy aircraft indeed

that will be my next attempt.

Around 3/4 i think maybe 1 inch

I was thinking try a little heat. Going to take a pry par and cut it down and try to knock them out . Or see if I can find an axle shaft

My tool worked great for removing the nuts. I have gotten all the dog bone ends out except for the 2 behind springs. The dog bone itself is gone as the bushing came completely out . I attempted to use a ball joint fork on the back side. (Worked on the other 2 uppers) Hit the casing and the...

Follow the tm for the repair. Taking the cab off would be a lot of Unneeded work

Here is a regular m35 spring and the m108.

I didn’t want to remove the ubolts either. And please realize this is not a M35. The 108 has much more spring to deal with esp. with the large walking beam across the top of the spring pack. The tool I made took about an hour to make and cost $8.00 in material. Scrap metal and flee market...

Couple more of the tool. I cut the the first socket down to much so had to weld on another. Added a little bend to make it easier to hit with the hammer

Made a little progress today. The project had been stalled because I really did not want to remove the spring pack to replace the final 2 upper dog bones. Well along comes member Redpawn who made a tool to remove his dog bones without removing the pack on his m108. Here is a link to his...

Have your paint guy do the following list of the FS codes in the HD paint computer is found by going under "Competitor Color look up" and selecting Federal Standard as the manufacturer then have them enter just the five number code.

Do you know the part number of the socket you got from NAPA? Did you figure out where the line went? I could not exactly tell what line you needed info on.

Your moving much faster than me. Nice

Nice would live to have deuce dump

Yes that’s all you need.

Those are tow bar feet. The chains are for clamping around the axle the others attach where the clevis’s are attached

Couple more pics. Can’t seem to upload more than 2 at a time. The behr is good paint.

Painted my halfjeep project today with the Behr. Used a sample from testors model paint to get a perfect match for WWII 34087 sprayed it with a harbor freight purple hvlp gun set at 40 psi with a regulator on the gun itself. This gun works great with the latex but I do recommend drilling out...

Still needing help if anyone is avialable. Any body buy those growlers or mvtr’s in albany ga coming this way? Or slantback. Thanks

There is no pic