Search results

I guess the TCV is inside and not easily accessible? Looks like you have been busy up there.

What oil are you going to use in the airpak? Some people suggest hydraulic jack oil and some say air tool oil. I ended up using the hydraulic jack oil,l but would like to see what your thoughts were.

I had no idea these were used in the Vietnam War other than for stateside use. I guess that myth went right out the window. Awesome find!

I don't know the answer to this but would like to do the same thing if it works. Keep us posted on what you do.

Can you give us any specifics on where this pin is located? Might solve the issue on one of mine. It shifted fine 30 years ago but sat for 21 years before being used again. Sat another 6 years after that and I hope to get some work done on her as soon as I get her to the house. That will make 3...

This has not gone as easily as I had hoped. After removing the bolts the TM said, and attempting to pry the panel out and hammer down, I found out that at some point in this trucks life, someone decided to tack weld these panels together. Not the normal military spot welds. I sure wish I had...

I have started removing things to get the rusted panel out but have a few questions since I am not understanding what the TM is saying to remove. It says to remove the window frame. Do I remove it from here? Or here? Also what is the best way to get this pin out? I ran out of daylight...

This looks like it could be a little difficult. Lots of stuff to come off. I found out how to do it in my downloaded copy of TM9-1819. NDT...Did you have to remove the back panel and everything else the TM says? I only need to replace the passenger side. Also what is the best way to remove the...

Getting geared up to do some more welding in a few weeks, I ran across this. It appeared to be some small bubbles at first until I started pushing on it with my finger. This is on the passenger side above the toolbox. What is the best way to go about fixing this? One of my parts trucks...

It can get a little warm where I live. Don't want to do away with my A/C.

I plan to.

Is that a Canadian Military only thing? I have never seen one on a truck down here.

I have no idea what any of that is. Sorry. Good to see you back!

Pearat... I was contacted the other day about this truck in Lamont, OK. The owner sold the land that the truck is sitting on and will close on it in about a month. The truck is going to be scrapped if he can't get it sold. They were asking $500. Story with it is it was purchased from the local...

I talked to Memphis the other day and seems they have what we need for a good price. They have a lot of things not listed on their website. The roof rail weatherstripping is sold in 5 ft rolls and the price is currently about $1.87 a foot. The door weatherstripping is also sold in 5 ft rolls...

I see that on their site. I'm going to call them and ask about it. Seems reasonably priced.

I believe you are right. I am having a hard time finding who supplies it and where to get that exact stuff in the lengths we need. Any ideas? Agreed

The samples from Steele came in today. Here are the pics. The door weatherstrip is thicker but a little more narrow than the original. The roof rail weatherstrip does not fit as tightly as the original stuff, but may be as close as we can get. It would have to be glued in place. I'm going...

That is what I was looking for! Had no idea what it was called.

Thank you Blake! Looks like what I have found is very close then. So far I haven't been able to find anything closer to the original.