Search results

I’ll give that a try. They are fully LED fixtures.

I tried it both low and high beams. Still don’t blink. I believe when the headlights are on the front turn/park lights are always on. Hmmm I just can’t figure this one out. Maybe the 3 lever light switch? I just don’t know the flow of power to stuff. Also I unplugged one of the headlights to...

Also to better clarify. When all lights are on aka headlights/running lights the amber lights are illuminated/on. They just don’t flash.

Tried a couple more things. Cleaned up the grounds. That did nothing. Ran a diffrent wire to a good ground. That did nothing. Read a bunch of diffrent things about leds. Does anyone know if polarity is a thing on these trucks. Read that if the lights are on it could revese polarity or somthing.

Update- so I installed some resistors on the rear lights. The led bulbs on the rear work perfectly now. I then installed them on the front and they still don’t blink when the headlights are on. They have always blinked with the headlights off and they have always not blinked with headlights on...

Update…. Got a whole tie rod thing (new old stock) mooge problem solver off eBay for $120. Slapped it in there and problem solved. I can’t believe they would put the ends in wrong. I’m not sure how you could even do that haha. Drives nice a straight without any weird tire noise. Highway speeds...

I would do that but I got ride of them already.

Anyone put resistors on there wires? If so what kind and where it implement them.

I’ve tried it on and off. So with the truck on: -headlights (led) and tail lights (incandescent) on. ——-rear lights blink and get brighter with brake applied. Front turn signals don’t work. But they are on. -headlights (led) and tail lights (led) on. ——-led rear light bulbs in I don’t get blink...

Also I the rear blackout wiring I just capped off to run civilian style rear lights. Not sure if that effects anything?

Ok so I tried unplugging the flasher and it did do anything as expected. What I did notice, stupid me is the new flasher 11613631 does work if I don’t have my headlights/night time running rear lights on.,which is weird. So what I have now working front and rear turn signals also brake lights...

I will try to see what I get when I unplug everything. I will see if I can pick up a flasher with a ground on it.

https://www.grote.com/warning-hazard/flashers/2-pin-flashers/44850/

Welp it didn’t work. So I bought a Grote 44850 flasher thing and I can’t get that to work either. Hooked it up to the A and B on cannon plug. With that I only get steady light on, on the blinker handle, and no blinking at all. The 44850 is supposed to be for led. Any suggestions? Maybe...

If I can’t get it to work I’ll be making my own. Haha https://www.steelsoldiers.com/threads/m-series-flasher-relay-civvy-conversion-how-to.134679/#post-1743825

It didn’t work. I’m going to try a couple thing with it before i say it doesn’t work.

Perfect, I’ll take a closer look at what I got going on.

Thank you guys for helping me out. Haha

I’m kind of confused still haha. So in my case do you think one of my tie rod ends is wrong? Or is the sleeve thing on wrong? Is the sleeve a direction specific thing. Like one side is for right hand only and the other is left hand only? thanks for all the help.

Serial number is 252865.