• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M813rc

    Dodge truck in Norway

    Being Camp Pendleton Marines, we were used to being refused service in California restaurants ("We don't serve your kind here", "We don't serve baby killers") in the late 70s-early 80s. Back then, Marines were easily recognizable, we were the only ones running around with very short hair, the...
  2. M813rc

    CUCV Camo Paint Pattern

    It's a running joke with he and I. :) Cheers
  3. M813rc

    CUCV Camo Paint Pattern

    It's a complex piece of equipment, I'll get you a book on how they work. Its mostly pictures, no big words. :p Cheers
  4. M813rc

    CUCV Camo Paint Pattern

    As Cucvrus said, chalk shows through the paint. I have had good luck making small pencil marks at key points of the pattern, don't have any problem with them showing through. I've never tried outlining the whole pattern in pencil, I may have to experiment with that. A friend did the same...
  5. M813rc

    What have you done to your 5 ton this week?

    Kendelrio, IF you get a CH-53 to haul your truck, make sure you pull the circuit breaker for the sling hooks after loading! If you don't, the electrical gremlin that runs around those birds might just go down there and pop your hooks open and drop your load unintentionally. You do NOT want...
  6. M813rc

    New Project truck

    Looks like it has (had?) a civilian sliding 5th wheel (Fontaine?) I put one of those on one of my M931s, lowered the trailer nose height by almost 9", and allowed for towing some of the shorter necked trailers. Enjoy your project! :) Cheers
  7. M813rc

    Dodge truck in Norway

    Lovely truck. Where in Norway? I was stationed there with the Marines back in 1980, we were based on the airfield at Vaernes, outside Trondheim. Back then the Norwegian army were still operating large numbers of WWII-vintage jeeps, WCs, and CCKWs as front line trucks. They were beautifully...
  8. M813rc

    Lizard Skin Questions

    Not a Humvee, but results should be similar - I sprayed my M1028A2 cab with Lizard Skin from the bottom of the dash on the firewall to bottom of rear window level. Before, when parked after a run at 50+ mph, my floor and transmission hump would measure around 85*+, and your accelerator foot...
  9. M813rc

    HEMTT, well kind of

    I was watching your build of the truck for quite a while, then lost the link when my computer decided I didn't need my bookmark list anymore, never could find your thread again. Nice to see it finished to this point! I wouldn't have any problem if you showed up at one of our club events in...
  10. M813rc

    stencils

    SETOYOTA, your machine sounds very cool. Beats my method of drawing the lettering out on manilla folders, then cutting with an Xacto knife! :D I'm with Mogman on possibly overstressing the little grey cells, but I may have to look into one of these newer machines and see if old dogs can learn...
  11. M813rc

    What year model did the m35 go to duel reservoir brakes sysytem?

    The under-the-floor brake reservoirs are a total pain to get to, open and close, and the risk of knocking crud into it when open is high. You can buy a vented car reservoir (I used one from an Infiniti, I think) and mount it somewhere convenient and run a line down to the fitting on top of the...
  12. M813rc

    stencils

    I measured the lettering on the actual Marine vehicles, that's where the 2" tall with 1/4" stroke (line width) came from. Overall width on "full" characters (M, O etc) is 1 3/8". I don't recall off the top of my head the spacing between letters, which is why I didn't quote it, I'll have to dig...
  13. M813rc

    stencils

    Larsen does not do modern USMC stencils. Few M37 stencils are relevent to Humvees. Cheers
  14. M813rc

    stencils

    I have not found any of the commercial MV stencil makers to produce accurate 'modern' USMC sets (by 'modern' I mean markings for roughly the last 30 years). However a local print shop can probably produce what you need. I don't know if you have original markings on your vehicle to reproduce...
  15. M813rc

    V100 on display in Wisconsin

    I trust John's memory and knowledge way more than mine! :) Cheers
  16. M813rc

    V100 on display in Wisconsin

    How does that song go? "He's not wrong, he's just different..." :) That is one of the early prototypes, #2 if I recall correctly (I'll have to check my notes). Lots of differences from later machines and production vehicles, but that's what prototypes are for - make one, let folks try it and...
  17. M813rc

    M1095 M1082 trailer towing with a M809 series. How to integrate the brakes if M809 has the Air over Hydraulic still installed.

    Yes. There are two connections, one is Emergency that connects to the red hose on the trailer, one is Service that connects to the blue hose on the trailer. Emergency is usually the one on the right rear, service left rear. Do test them, I have seen trucks (and trailers) plumbed opposite. The...
  18. M813rc

    Operation: Ethel. Kendelrios M37 (re)build thread

    Semper Fi, brother! Looking forward to seeing this one done. A couple of my trucks have 'US Army' stenciled on the dash, I added my own above it that says "Liberated from the". :) Cheers
  19. M813rc

    Bumpers

    Short answer - yes, but not easily. Several on here have done it over the years, and I think Barrman's M1007 build details how he did it on a Suburban. Cheers
  20. M813rc

    Operation: Ethel. Kendelrios M37 (re)build thread

    Well, if you go by the manual, a single point of the hood star should point 'forward', as in toward the front of the vehicle rather than at the windshield like yours. That said, the proper-per-the-manual way always just looked wrong to me, and if you go by photographs, a lot of soldiers thought...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks