• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Andyrv6av8r

    HMMWV Hood Lift gas shock - anyone MADE one?

    Brackets were made from 1/8 inch thick 2"x 2" angle. See post#14 for the actual struts.
  2. Andyrv6av8r

    Anyone need a 114" serpentine belt?

    It was in place when I bought it.
  3. Andyrv6av8r

    turbo to NA

    What's involved with getting a turbo 6.5 and turning it into a NA engine? I'm not wanting to hunt conversion parts and modify my M1045A2; trying to keep it simple.
  4. Andyrv6av8r

    My own affordable;) spare tire carrier

    Why so ......BIG and how are you getting the tire assembly up and down?
  5. Andyrv6av8r

    Swing away tire carrier dimensions

    It's just a piece of regular 6" C channel like your drawing. I didn't have a tire carrier to measure from either; I looked at photos and just measured what I had and made it work.
  6. Andyrv6av8r

    Swing away tire carrier dimensions

    The 9" right triangle will give you the angle. I basically just centered the tire on the tailgate and it came out fine. There's plenty of room on the screw jack, even if you're on a hill.
  7. Andyrv6av8r

    How to make drivers seat more comfortable

    Used Prius seats from Craigslist. $65 for the pair
  8. Andyrv6av8r

    What should the oil pressure be on the 6.5L?

    Bosch 2 inch
  9. Andyrv6av8r

    Unloading an M1082 - Caging Bolts and other unloading strategies

    I backed my 1078 up the trailer and pulled mine off after hooking everything up.
  10. Andyrv6av8r

    All 6 tires airing down

    A wheel valve core threaded in mine perfectly to stop a leak.
  11. Andyrv6av8r

    M105 trailer...

    Looks good Donnie!
  12. Andyrv6av8r

    CTIS highway light continuously flashes

    https://www.steelsoldiers.com/threads/939-air-compressor-governor-advice.125191/
  13. Andyrv6av8r

    stock high back buckets

    I did.
  14. Andyrv6av8r

    Steel Soldiers giveaway sponsored by hawkerbattery.com

    In
  15. Andyrv6av8r

    New from South Carolina

    Welcome from the Upstate
  16. Andyrv6av8r

    Tennessee dealer that will work on military tires

    Then deflate the tires, remove nuts from wheel studs, take the rims apart and throw away the donut and old tires.
  17. Andyrv6av8r

    Tennessee dealer that will work on military tires

    Are you replacing the tires?
  18. Andyrv6av8r

    Light bar!

    Bent mine up and welded it out of 1-1/4 pipe. It works fine and was cheap.
  19. Andyrv6av8r

    HMMWV Hood Lift gas shock - anyone MADE one?

    But that 4 inches can be done with 1 or 2 fingers. I literally have to push down slightly to engage the hood latches. It takes more effort to close than open.
  20. Andyrv6av8r

    HMMWV Hood Lift gas shock - anyone MADE one?

    Almost lifts on its own. Lift about 4 inches and it goes up by itself.
110,879members
165,310threads
2,326,178posts
2,172online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks