Search results

Welcome and have fun with it.

Great looking!!

Have a safe trip.

Believe it or not, but I was told they are rate for 3000lbs, not sure I would trust them for that.

Very Nice repair, Thanks for sharing!

I would try to prime the pump with the bleed screw on the back side of the pump (10mm wrench). Pump the primer till no air comes out of the bleed screw, my take a lot of pushes (30-50). Next if it still will not start look at the pickup tube in the tank and make sure it is not cracked at the...

Did you put oil in the knuckle or Grease? Only the Pumpkin gets oil (80-90w) The boot is just to keep grease in and water out.

Sounds like a fun project!! The Navy and USMC trucks did not get the ABS upgrade. As far as I can tell anyway.

I made a mount for the end of the boom on my M936 and put the flag on a pole.

:goodjob: Looks like a great project

Yes duels will fit on the rear, do not know about the Saginaw pitman arm.

Welcome from AZ

I would keep all the same size tires on the truck.

Wow, I guess I need to check my trucks closer.

You will be fine with your pickup, but like 98G said a farm high lift jack works great.

Welcome!

I had a M932A2 that did that also, I was thinking it was the idler pulley.

What a job with out soldier B.

2 hours in a great swap time. When we did my M925 we pulled the transmission as well, but I had to deal with a PTO.

Now that sucks for sure!! Wish you luck with the motor swap. I did one about two years ago and it was not to bad of a job. I see you have a wrecker for the job, that is what we used to change my motor.