Search results

If it is still vented to the air cleaner check your air cleaner, if I recall if the air pack is bad it will vent fluid.

The ambulance cover is not like the cargo cover that has extra material that hangs over the sides and is tied down, it only just barely goes over the sides and is held against the body with a metal strip. Given the fact it may have shrunk over time it may appear to be short compared to a...

The -34 manual shows a special tool called an "arbor" for turning the drums on a lathe.

I use Lucas heavy duty oil stabilizer in mine @ 100% and use 50% in the transfer case. Its "sticky" and less likely to leak if the seals have wear. The lube order calls for 90wt gear oil.

I sent my old cover to another member here who is having one made, perhaps he will chime in when it's finished. When he is done the old cover can be shipped to some one else if needed.

It doesn't pump oil if your transmission is in neutral, to test it in a "static" mode you need to put your transfer case in neutral and your transmission in gear then it will pump. If it has sat for a while this is a good way to prime it before hitting the open road.

Good job, nice work.

Go to plan B and never look back is good advice, been there done that.

OK Bob thank you it was a perfect match to the original and a great price , all installed. Still have some play and I am pretty sure it's in the box as it has a rough spot in it, ordered a replacement from RA will report back.

No problem NDT, this is how we learn, so is that plunger a reverse lock out ?

Here is a picture of the shifter assembly I rebuilt, you can see the end of the plunger in the center to the left, the part the shifter hits against is hidden in the center. So what does this spring loaded plunger do ?, it prevents the shifter from moving the shift rail unless you lever that...

There is also a safety device so you have to depress a spring loaded plunger to engage reverse, it may be stuck/rusted.

I have 6 solar panels, a 24 battery 24v battery bank, 3600 watt inverter/charger and 8Kw Isuzu diesel generator that auto starts/stops when needed, purchased a "service truck" air compressor that is engine driven, that took care of my high demand air needs. Propane appliances, direct vent oil...

It's actually snowing right now, truck has been inside all winter and I have not done too much. All the small parts are blasted-primed-painted, working on the engine now, had to to replace the freeze plugs under the intake, two had holes rusted through them. A couple of bolts are broke off on...

Thanks, that was what I recall.

I sent it to quarkz, perhaps he still has it.

There are generally two types of tanks, one has the electric pump inside it often called non-emission tank and the later tank without pump(mechanical pump on engine) with extra connections called emission tank, there may be a non electric pump tank without emissions but it's been a long time and...

Complete used backing plate and the brake line. The wheel cylinder will need to be replaced, cheap on ebay, shoes may be able to be cleaned up.

It's been several years since I converted to power steering on my M882, my M886 has the same power steering set up but needs a new drag link. The new surplus ones available say manual steering only, I don't recall having to change the manual steering one when I converted the M882 to power...

A M105 trailer cover may work but I don't have one to try, the end curtians on the goat snap in which seems to be unique to the goat, although that really doesn't matter for a replacement cover.