Search results

yes i did ---put it into reverse and still binding when turning--moves freely in neutral in a turn

My M998 is locking the axles in H as it does in HL--N and L are ok--I do not have a transfercase light on this humvee--could this be an external adjustment or is something broken--on a hard surface the axles bind during a turn in both H and HL--Thanks George

These are owned by gov-planet or were owned --They bought a load from the Marines on a private sale--I was told this by a gp sales rep in the new sales dept--You can call the sales guys up and make offers over the phone--if the offer is high enough you get it and the sale page will say :Won...

Hi--did you find out the reason for the charge at Bruce's storage yard--

he helped through an injection pump problem that stumped me for 2 years--great guy

Joe got a tractor with 50 miles since red river and a 923a2--

I take this humvee spear fishing-------that is pvc pipe from Lowes--tight fit--I was going to cut it down to 2 feet but just took it off---

I replaced the front left 1/2 shaft--that did it---that was where the noise came from--the shaft looked good on exam but was bad--they are cheap--$125 on ebay

which loctite--red or blue ----where do you get your 1/2 shafts and rears--thanks

At low speed coast I could feel a rumble in the left rear--when feathering the brakes I could feel it vibrate on rotation as if it had flat ball bearings or bearings coming apart--thats when I called AAA--another humvee I continued driving under same condition and the shaft stopped turning...

Got them home from Fort Dix in time for Christmas Just got them home--Took the best one for a 30 mile ride and had AAA tow me home--lost a 1/2 shaft--I just like looking at them--good projects for nice weather--good luck to all the new humvee owners--George

I did not--if I went to a lower 5th wheel it may bring the height down enough--would I be looking at 3 to 4 inches?

Thinking about putting 24.5 tires with budd wheels on my M931a2 tractor--need to lower the height to tow standard trailers--Do the Bud wheels bolt up directly or how could I do it--Thanks George

Got my Humvee today at Dix--perfect weather--did not know if it would fit on my flatbed--Ron from GP said he saw no problem and forked it on----Got everything home with no problems--Felt like Christmas the whole way home--got home and drained 10 gallons of water from the fuel tank--will try to...

When I crack the #3 line the rpm does not drop as with the other 5 lines---did not look for the rings at that time--is the injector difficult to remove--thanks

If there is no wind the whole area is full of rings--I should rent out the truck for kids parties

Have an 8.3 cummins with a miss in the third cylinder--no blow by--seems like the injector nozzle may be bad--any ideas on cleaning it up--How difficult is it to remove and replace--video of smoke rings below--thanks George https://youtu.be/wkjD9Mr1GrA...

Anyone find out the cause of engine running but no gauges or heater motor operating--thanks George

I used trail worthy also--great product-----very nice humvee--did you wait 8 weeks for euc--

looks great--what batteries will you use--anything special