Search results

The fluted drum only sets the first lay of cable, it does not restrict the cable to one wrap.

Unless you know that the transfer case is good do not drive it home, at close to 36,000 lbs = the BIG hook which = BIG $

TC or truck commander, also that is NO LONGER a 5t off road truck, what it is is a neutered what WAS a off road rated 5t truck, which means it is rated no more then 2 1/2t

Thought it might be a explosive device used in case isis wants to give back a captured cucv.

ONLY if you are planing to do this by yourself :???:

Yes, STEEL SOLDIERS is a computer program NOT a phone app.

BECAUSE where the springs are is where the most of the frame twist is, if mounted where you think they should be, you WILL break a frame.

Hard going in high sounds like the syncros ??

If you heat the cast, allow it to cool down SLOWLY, a fast cool down will make a crack, also when heating cast widen the heat area as much as you can with in reason, this will also help to prevent cracks, there is a certain temp you do not want to go over or you are looking for a better chance...

REALLY, let the law do it's thing then OPTION B

Load trackers in/on our truckers would work good getting our stolen trucks back.

On the m322 heavy equipment trailer, the landing legs are three pieces, the top, the crank down, and the drop down, the drop down WILL drop out of the center section if the lock is released while up in the air and not secured by something, if a toe is under the third section, or a hand moving a...

Get the 8v92 HOT, you WILL LOSE some heads.

Is this the MWO to adapt the seats to fat civi use from skinny GI use.

The -10s say that the cable should be WIPED down with a OILED rag EVERY TIME after EVERY use, the It is supposed to be pulled back out then pulled in while wiping down. REMEMBERED ALWAYS WARE GLOVES WHEN HANDLING CABLE, WIRE OR FIBER.

What about a water proof but a breathable cover, if the cover is for dirt then water proof is not needed.

The reason for NO winch covers is that the covers trap moisture which deteriorates the cable, both steel core and fiber core, the fiber core is worse because a dry cable WILL draw moisture to it.

I dropped mine using a come-a-long and a few snatch blocks to run the cable to where it needed to be, came down nice and went up easy, though it took two people to get it aligned. You need to get two 20 ton jacks and 6x6 blocking to stay on the truck as part of the truck kit.

NOT gear lube but grease with a bit of water and rust, this is a good thing, just KEEP greasing, you can not over grease , the plugs are for GREASE FITTINGS, pump it till grease comes out a end/ends.