• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. O

    12k shock mod (Softer Ride)

    Need to try this with Armada mod springs
  2. O

    Pitman arm removal

    Sorry, own an 998.. Look at te TMs Best source for part numbers to cross refference
  3. O

    Relay

    :(
  4. O

    Rear half shaft seal leak

    Excellent write up !!!!
  5. O

    What have you done to your HMMWV today/lately

    Fake news, they run hot enough without blockage.. But in retrospect Ive been running mine with Armored grill with not a problem. Good Luck
  6. O

    What have you done to your HMMWV today/lately

    Airflow Ugghhhh
  7. O

    If it was that easy...

    Hmmm, never seen a 3gear shifter mated with a 4gear tranny
  8. O

    Fluids for HMMWV

    DEX VI SAys right there in Lube Order
  9. O

    Pitman arm and idler arm movement

    Need to do it on the ground.. Have someone move steering wheel while you look for play under vehicle. Wear eye protection and maybe some ear plugs 👍Yes vehicle running.. PS.... In park or neutral with parking brake
  10. O

    What have you done to your HMMWV today/lately

    Im betting those inside weights didnt make it 5 miles !! Not much clearance on the inside..
  11. O

    Gasket makers

    Just from my thining, Anerobic may be used in stressed areas. Such as the stearing knuckle. No give between surfaces, where as a rubberized sealant would have movement. This is mearly my deduction, but sounds good.
  12. O

    What have you done to your HMMWV today/lately

    Lift ???
  13. O

    What have you done to your HMMWV today/lately

    Whats your dream truck ???
  14. O

    Tie rod angle moog canted vs straight

    I thought the angled balljoint just went on the knuckle side..... Thats looks very odd
  15. O

    3 x geared hubs leaking

    Looking good.. PM is key
  16. O

    What have you done to your HMMWV today/lately

    Im thinking 1/4" stall mat on the inner fender well with maybe rivnuts to hold....
  17. O

    2000 HMMWV M1123 Project

    I bet that was fun driving home 😂😂😂
  18. O

    New Wheels and Tires

    Impressive ! Thx
  19. O

    Lenders for HMMWV purchase?

    Your state HMMWV freindly ?
  20. O

    Is this a typo mistake or it’s possible?

    So a 242 will direct bolt onto a TH400 ?? Hijacked 😂😂
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks