Search results

The one that came with mine was in a bag with all the tools. Fits easy in the box under the drivers side rear seat.

That sounds like a great idea. I would have to run a ground wire to the light but putting an overhead organizer on it is genius. I tell ya some of the best ideas come out in those field mods.

In

So I’ve refurbished two interior lights and was looking for options to mounting these. I want to put one over each front seat. I’d like to either mount to the front roof bow or between the bow and the B pillar. Any ideas or thoughts would be great. Thanks

👍

In

I never thought of that. But that’s enough to make up my mind. 👍

So I installed a 1” body lift and after doing the tub mounts I stand back and wonder if I even need to do the hood mounts. I know the body lines are a little off but it closed right up and my lift hooks don’t look weird. I’m really thinking I don’t need to space the hood brackets. The only...

Nice. I’m going to make a set of the angle braces. They’re a unique size of c channel so I’m going to have a shop brake some flat stock to the right size. Then I’ll make all four angle braces. Should be a piece of cake.

Bumper is done. On to other adventures.

So just ordered a pair of the teardrop shackles for my A2 bumper. They do not have the hardware. Are the threads 3/4” 16?

I’ve not reached a conclusion on this matter. In a pinch it will work how I have it but I’ll probably never really need that many in my bed. Hopefully.

Wrong pics

Ha ha. I had installed e-track and was seeing how many fuel cans I could strap in. Only thing is I only have 1 fuel can

So I’m also building a radio set up. Built the cover to mount the ky-57’s

So by the way. Does anyone install the plastic water deflector with the mud flaps.

So I had gotten this really nice a2 bumper. And it looked that way all the way up to the moment I dropped it. 😢

How about the John Deere green Milcommoguy used. 👍

So I bought 1/4” 28 bolts and they really didn’t want to thread more than a couple of turns. So I was going to just run a 1/4” drill bit through them and use nuts. Then I decided to use a thread chaser first and that did the trick. Thanks for the info.

Is 1/4 20 fine thread. I have a 1/4 coarse thread and it wasn’t able to screw un