Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
First thing this morning short / shut down. Tried the other OP's hair dryer trick down the inverter through the voltage switch trap door. Maybe 4 mins. and starts no short. Thanks kloppk you were spot on with the problem. I tried with small load running for 30 mins. yesterday with hood closed...
Would think the fix will cost you a couple of bucks lots of sweat. Good learning experience though and the next time it will only take you half the time.
OK told my self I was done with the military Generators. Thanks to Allen years ago he bought all three 10k 5k and 3k. Knowing nothing about generators I did the unthinkable and picked up the 3k inverter from lake butler Fl. the other day. My thought was if I loose power I can still run my well...
On the top of the IP is a large plug screw driver thingy and inside is fine mesh filter with if I remember a magnet built in. Other than the addition of the filter base/ spin on filter that can be added to like Wes said is about as much as I would do. Side note the small filter inside the PT has...
The stock filter head had a pressure relief valve set to open if I remember between 70 / 80 psi. The system still puts out around 60 psi min. to supply the Head so wonder if it was a bad filter as most have a good burst pressure. If the new filter head has any extra ports you could do a...
Yea not worried about mold / mildew trailer stays plugged in and AC set on 78*. How bout a water bed nice for sleeping and I do not have to get out of bed to get a drink of water in the middle of the night.
Yes I do have for that real emergency when got to go NOW and even a cork stopper will not...
Start putting lube on the threads and get it working good and just finger tight till full open or closed. I forget how many complete turns . More than one turn and less than fifty.
Spent a couple of hours at the drawing board to design a folding bed. Came up with this after much thought and one finger operation.
Truth right now I do not need a working kitchen or bathroom. Small shovel makes at drop point for bottom end waist and all trees always needs watering. When it...
Guess I would have lost that bet. I asked Ray / Razor and he said he never got one. Mine grandfathered from the early 80's and had Hazmat but Fl .wanted to much money for renewal so I dropped it. Yes Automatics is nicer my rears just geared wrong.
Did they make you get the CDL restricted license ? The one where you can only drive a class A truck with an automatic transmission. Thought Florida still does that.
I just happened to notice the larger footman loops in the 373 trailer were the same as on the M37 soft top cross bar. Looks like the smaller ones are 1 1/4" and the ones for the cross bar come in close to 2". They were rose budded to the cross bar on mine. I had one missing and I measured ten...
I bought a 24 volt remote starter switch for if and when the PCB goes south . Kept it in the truck when out and about or tool box when working around the yard. I only had the Cummins 250 and would use the thumb screw and remote when I had a no start with cab controls. From reading threads the...
Control knobs not in correct position? I put all of them on where they are supposed to be not half way in between even if the function is not the one I need.
I am changing to clean sheets on your bed. Cleaning the bathroom ( not that it needs it ) Making sure there is coffee for the coffee machine and vacuum the house ( not that it needs it ) well maybe just a little extra sand on the hard wood floors. Looking for worms incase you want to go fishing...