• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. BERZERKER888

    What have you done to your FMTV or LMTV today

    W13.. When my PPV diaphram took a dump and subsequently killed my CTIS , fan clutch soleniod and fan clutch, I unplugged the CTIS , replaced (fabbed) the torn diaphragm and all was good...but I chose to leave the CTIS unplugged and inflate the GY MVTs to 70 psi...the ride ,albeit slightly...
  2. BERZERKER888

    A Hens Tooth Up For Auction

  3. BERZERKER888

    What have you done to your FMTV or LMTV today

    works like a champ...under $500 for the entire set up ..
  4. BERZERKER888

    A Hens Tooth Up For Auction

    I call BS on that bid....and I thought I was a dumbass for spending $15k on a retran...
  5. BERZERKER888

    A Hens Tooth Up For Auction

    some one say "fried transmission"?
  6. BERZERKER888

    What have you done to your FMTV or LMTV today

    wire up the winch is next
  7. BERZERKER888

    What have you done to your FMTV or LMTV today

    fabbed up a base plate/post as well as welded a HF ATV winch to my HF truck bed crane.. almost had a heart attack at the price of 5/16 steel plate and a 1 foot section of 4"x4" x.25 post ..over $100 !!!!
  8. BERZERKER888

    not good I take it....

    the problem I ran I to was no one makes just the diaphram let alone the entire PPV..sure Haldex makes a PPV that you need to "engineer" to make it fit... I lucked out thanks is everyone !
  9. BERZERKER888

    not good I take it....

    ok fellow SS 1078 Money Pit owners ..as you may know, my CTIS, fan clutch soleniod and fan clutch all went on vacation as the same time leaving me with this... https://youtube.com/shorts/ENCXhZbi4Z4?feature=share now mind you the truck has been running quite well after my venture into the...
  10. BERZERKER888

    not good I take it....

    who knows...it just may be the original diaphram from 1995.... I wonder if replacements are available?
  11. BERZERKER888

    not good I take it....

    this is the rubber diagram portion of my wet tank air protection valve...maybe this is the reason the fan runs continuously and the once working CTIS is throwing 5 blinking lights .. thoughts?
  12. BERZERKER888

    The dreaded CTIS seal, bearing repack job on my MTV

    That’s is my intention…red gladhand to pressurize…..but Floridas version of Mother Nature is not cooperating today…
  13. BERZERKER888

    Checking the FMTV fan system

    Ronmar to the rescue….
  14. BERZERKER888

    The dreaded CTIS seal, bearing repack job on my MTV

    Any thoughts on why the engine fan is always on….fan clutch solenoid..?
  15. BERZERKER888

    Cab air bags, Power packer

    per air bag or for 2?
  16. BERZERKER888

    The dreaded CTIS seal, bearing repack job on my MTV

    so..I went to lunch..returned to the truck to start the diagnosis... nothing...CTIS flashes all 5 modes lights... no building pressure..and the fan is continually on...at 165-ish degrees?...seems no air pressure to fan ?
  17. BERZERKER888

    Cab air bags, Power packer

    Cost and where to buy?
  18. BERZERKER888

    The dreaded CTIS seal, bearing repack job on my MTV

    Reviving and old.. thread..notice the whistle..CTIS seal leak ?… blinking HWY light, tires (4) aired to only 35psi... when I tires to engage the sand mode, all 4 CTIS light started to blink.. thoughts? https://youtube.com/shorts/ENCXhZbi4Z4?feature=share
  19. BERZERKER888

    A Hens Tooth Up For Auction

    super rare indeed... and so are the repair/replacement parts..
  20. BERZERKER888

    A Hens Tooth Up For Auction

    $65k?....if that's the case for the auction winner.. : " a fool and his money are soon parted"...
Top