Search results

Tough you can download the forms online, DOR Form 551 must be purchased at your local motor vehicle license bureau. I believe the cost is $25 + $2.50 processing charge + additional charge if you use a credit card! Both the Form 551 and Form 5062 require sign off from a local motor vehicle...

The fact that the vehicle is titled in another state will be beneficial. However, the VIN may still require verification with a Missouri Department of Revenue Form DOR 551 or DOR 5062 or BOTH! Check with DMV in Jefferson City for your specific vehicle.

8madjack, To my knowledge, the LMTV (4x4) units were not fitted with a Material Handling Crane (MHC). There is a Light Material Handling Crane (LMHC) that is mounted on an upright post. The LMHC was mounted in the 4" x 4" square holes in the bed of the LMTV or MTV (6x6). The MHC, 5,000 lb...

I tried tracking the heater element a couple of months ago. Here is the info and photos I found: BOWL w/ HEATER ELEMENT RK22141 4330-01-418-7593 Parts kit, Sediment Bowl Heated bowl kit, 14 vdc heater HEATER ELEMENT 22002 04F 49 93 Valid Racor part number, but proprietary. Not available...

YES! The side opening handles will probably be more robust also. Look forward to seeing the kit.

Spoke with the staff last week and they were very helpful! Glad this resource is available and look forward to working with you in the future.

I had a leak in the switch manifold. Turned out to be the push button switch for the cab air bags (or air springs as listed in the Operator's Manual). All of the o-rings were available locally. Once the o-rings were replaced, everything worked fine. Photo of the switch I rebuilt: Here is...

The wiring diagrams for the FMTV series are found at the back of the -20-1 manuals (TM 9-2320-365-20-1 for the LMTV, found in the Technical Manual section of this site). The wiring, hydraulic and pneumatic diagrams are all foldouts and will may not be found via a search with Adobe Acrobat. The...

Welcome from Macon, MO!

Welcome to the green addiction! I'm in Macon, an hour north of Columbia. There are several SteelSoldiers in the St. Louis area and other parts of Missouri. Stay safe and stay in touch, firefinder

Does anyone have a reference of where the "3 IN 1 SEAL TOOL", PN 12489331, NSN 5120-01-560-9421 is actually used? I have been unable to a reference of anything other than "seal driver" used on FMTV's.

Extra Special Tools Reworked LMTV, Sorry, the extra FMTV Special Tools Kits were sold. However, I will be glad to take measurements, photos, etc of the kit I have. I do have an extra "3 IN 1 SEAL TOOL", PN 12489331, NSN 5120-01-560-9421 if that would help.

Seth, First of all, thanks for posting the great photos and videos of your vehicle and adventures! I created a thread detailing some of the FMTV Special Tools. There are photos and a .pdf with details on the NSN, manufacturer and part numbers...

Thanks for the follow-up!

I agree snowtrac. TM-9-2320-366-34-3, Section 16-7, Page 271, discusses removal of the hoses from the counterbalance valves. But, there is no discussion of bleeding. The only instances in the tech manuals I find of bleeding is in the fuel system. Nothing in hydraulics. The hoist motor...

I replaced some of the hoses on my M1084A0 Material Handling Crane. Lost about 2.5 gallons of hydraulic fluid during the hose replacement process. I was impatient and tested the system without refilling the reservoir. All systems worked fine until the boom extension and lift cylinders seem to...

I have a "real" War Pig that apparently saw action. This vehicle is an M1084 (6x6 cargo truck with a crane). I'm very grateful to DSD277 and other members who have provided a lot of details on how the vehicle was configured and used. The vehicle was not running when purchased and had a...

Additional photos of: FMTV SPECIAL TOOLS KIT Part Number: 57K2708-003 NSN: 5180015459967

I purchased some FMTV special tools kits and listed the extras in the classifieds. After posting, I realized how often I search for information on special tools and thought it might be a good idea to start a thread to consolidate the information. Many of the special tools have dimensioned...

As Stellaevil notes in the above posts, the attachment I provided may not be correct for your needs! Please check with Stellaevil or your equipment manufacturer for your specific requirements. My prior post has been updated with a WARNING notice.