Search results

The starter came off an older 5 ton.btw don’t think there was a PCb box. Your mileage may vary

Has worked for 5 + years

You can use a 5 ton starter on the deuce and remove the relay

What do you plug the holes with?

To be honest I still think the whole thing will grenade itself at any moment. I definitely couldn’t have gotten this far without some help from knowledgeable friends . While to some this may be a weekend project for me this has been a huge task . I had never attempted anything similar but I...

And yes pjwest03 you are correct. Not sure why I was confused must be tired . Anyhow may order that for a future install

I just fixed my copper line. I had the stuff to do that with. I will worry about putting nylon line on in the future.

That looks close but the flare end would need to be threaded to go into the block on the tank

Would you have a picture of what I’m looking for? To replace the large block fitting. Parker has thousands of fittings but I have not seen anything that will work. I suppose I can take the pump apart and investigate further.

Other than cutting off the copper line after the tank connection and using a compression fitting to attach a nylon line I don’t see how to replace the main supply line with the DOT stuff . What sort of fitting and where would you get it to replace the one on the tank?

I suppose what I need to start with is replacing the elbow fitting at the tank with one that is a non inverted flare. Next would be nylon line with proper ferrule and insert for the new fitting . This same process would also need to be done at the primary filter as I believe the connection is...

The problem is I don’t know what to buy or where to get it.

The early mirrors are hard to find

When I see the term ferrule I think of the compression ring you put on hose when using those fittings . Please forgive my ignorance but what do I need to use on the poly tubing or atfe tubing to actually connect it to the fittings on the tank and the filters? Are there flared inserts that go...

Looking at replacing the copper lines on one of my trucks. Searching through the forum there is a lot on replacing return lines and the use of nylon air lines . Any opinions on what is best to use in replacing the main supply line from the tank? Can you use a 3/8 line to replace the 1/2...

Free replacement running motor in ga. You would have to come get it but it’s free

Finally a little more work on the m108. Got the truck running with the fuel and airlines hooked up and the cooling system functional. It moves on it’s own. https://youtu.be/WzeQz3C-ojU

Is that covered by ins:-P Should have used a bigger helo to lift it whole.

What do you mean combat rims? Bead locks? Regular deuce wheels are lock ring not split ring. There is a big difference lock rings are perfectly safe if handled properly. With that being said I would not run 1400s on them. I know many have with no problems.