Search results

Could I run a mix of ATF and diesel in my NHC250 in my M923?

Still have it for sale? Any Pics?

Here is a picture of the atomizer you can see that it is all scuzed up, there is a small hole that the ether comes out of that was plugged, after soaking it in some solvent for awhile I was able to blast the gunk out with some compressed air.

I had the same problem with my 923 ether had no effect, I found that the atomizer (part that injects ether into the air intake) was completely pluged up with junk, this is probably what your problem is you just need to pull it off and clean it out there is a small filter that you should also...

Got the PTO mounted! Took me all day but its on there now. Just need to get the controls and the rest of the hydraulic system hooked up. Big thanks to Glen at BFR for helping me get the parts.

NHC250 good heat My M923A1 with the NHC 250 puts out great heat. Might check your heater (Green box pictured ) the fins on the mini radiator might be pluged up with gunk that would impede the transfer of heat. Just a thought. RK

soonest i would be able to get out there again would be 8th so it will probably be smashed by then, but there will probably be another one there sometime.

good saturday It was pretty nice on Saturday and came a way with some nice parts,van heater, 4 glad hands with hoses to go with the tow bar, and a nice digital light switch.Got the heater going today after a little tinkering, every thing seemed to work good, only problem was that I forgot to...

I'm going to get one of these for my M923a1 and rig it up with a remote switch so I can turn it on from my computer up at the house so when I get to the shop it will be nice and warm.

How early are you going to be there on Saturday Glen?

Think I can go on saturday, might drive the M923 just got the bed repainted and it looks nice! RK

Year 1986 Am general m923a1 Serial:C52309194 NSN:2320012064087 purchased from Govliquidation at Ft.Riley Kansas left hand side bumper number is B-201 Thanks!!

Found that the problem with the ether was that the atomizer nozzle was completely clogged and the filter screen was full of bits of rubber. Only thing I need now to use it is a new bottle since the valve on mine is leaking pretty bad for some reason.

Still planing on coming out to your yard on saturday to find the right hard top. Worked on the truck all day today since i had the day off of school, tried using the ether start but it seemed to have no effect, so i traced the hoses and found that the hoses going in to the orange thing in the...

Yep the extension is only used for getting it deep enough down the ramp to get the boat on the trailer then it comes off for towing down the road, so I'm just going to back the traler down the ramp untile it is almost touching the water and then chock the wheels lower the jack and set the...

Got the oil changed and it is running quieter than ever.Had a friend of mine build me a hitch for it and it looks real nice, going to put it to work this weekend and pull my dads 30' Hunter sailboat out of the lake, here are some pics of the truck hooked up to the tailer with the extra long...

More pics

D day Finally pried my self a way from the truck but it was to dark to take any good photos so I will post some more tomorrow,here are just some that I took on the way here and on arrival. Got to glens yard about 8:30 and got to the truck and was it nice, got a big shock when I lifted the hood...

Geting every thing ready for this Saturday, got the oil filter at NAPA and the fuel filter will be here tomorrow. Going to go get oil tomorrow also , will 15w-40 oil work? :driver: Thanks RK

Finally got my first MV! 1986 M923 A1 Had Glen at BFR pick it up for me, and I'm going to get it from him this Saturday. I found the sticky note spread sheet and found the NAPA number FIL 1970MP for the oil filter,and I also saw that there was a bypass filter listed as well, Is that the right...